Getting audio bleed on web interface on laptop

[Michael James]

On the latest version of BI 5.
On my laptop, when I pull up the UI3 interface, I see all 14 cameras. But when I pull up a camera inside the house (single camera view), I still hear a camera outside the house.
Does not matter which camera I pull up (inside or outside), I hear the same outside camera with the strong wind.

any ideas here?

 

[TonyR]

Check under "Group Settings" => "Webcasting" to see if "Enable group webcast stream" is checked.

 

[Michael James]

Check under "Group Settings" => "Webcasting" to see if "Enable group webcast stream" is checked.

Ive never been in this menu..... What should I click or unclick?

 

[TonyR]

Ive never been in this menu..... What should I click or unclick?

Check under "Group Settings" => "Webcasting" to see if "Enable group webcast stream" is checked.
If it is checked....then UNcheck it then click on "OK".

 

[Michael James]

Check under "Group Settings" => "Webcasting" to see if "Enable group webcast stream" is checked.
If it is checked....then UNcheck it then click on "OK".

That didnt fix it. I am still hearing audio bleed. Also, when I do that, I lose my web interface ability. What I mean by that is when I bring up the UI3 now, it only has 1 camera that comes up.

 

[TonyR]

Then of course you'd need to keep it checked.
Sorry I cannot help further, my version fo BI is 2 years old and doesn't have that page, I was looking at BI's "Help" file for an updated version.

 

[bp2008]

Look in camera properties > Audio tab and make sure that is not configured to get audio from "Another camera".

Also make sure the audio is coming from the source program you think it is; e.g. if you close UI3 and still hear the audio then it is coming from somewhere else.