Hello:

hotrod1952

n3wb
Nov 16, 2021
6
0
Iowa
I had given to me an Inwerang fisheye camera. Can anyone tell me what the default IP address might be?
 
I had given to me an Inwerang fisheye camera. Can anyone tell me what the default IP address might be?
The most I can find is somewhat dated but it stated that the cam is set for DHCP and should receive an IP when plugged into the router.

First thing I'd do since it was a gift is perform a hard reset of the cam; look for a button underneath it, perhaps under or next to a door for a microSD card.
Power it with a 12VDC @ 2 Amp wall wart power supply OR plug into POE switch or POE injector which is connected to the router; wait a full minute.
Connect PC to the same router, log into router's LAN (gateway) IP and look for it in the router's list of DHCP clients; the cam's MAC address may be listed and that same MAC should be on a sticker on the cam, likely under it.
If router doesn't list DHCP clients, then scan for it with Angry IP Scanner or Fing (any desktop IP scanner).
 
Last edited: