Help!!! Dahua NVR-5464ei Tour issues

[CloudSurfer]

These threads have really helped me with the set up of the above NVR.

I am currently having difficulty with the 'tour' setting.

I have 2 monitors (Main/Sub Screen); 24 Dahua IP Cameras on this NVR:
IPC-HFW3549T1P-AS-PV-S4 (10)
IPC-HFW5449TP-ASE-LED (13)
IPC-PFW3849SP-A180-E2-AS-PV-0280B (1)

Is it possible for the 'Main screen' to remain static (display 24 live cameras) and for the 'Sub Screen' to display Motion Detection only?

Any advice or guidance will be highly appreciated or a different set up of how to get motion detection only on one screen and live view on another.

 

[Revo2Maxx]

Can I see a picture of your Display screen. Normally if your NVR is Ai and you setup for Ai if it isn't able to support the dual monitor display it will say so when you try to save.. Then I have had it setup so my Sub monitor was on a 16ch split and main monitor as my own need view, Then when something triggers it would pop up on the sub monitor.. You would setup the sub by right clicking and pick sub channel mouse will move over there then click and change lay out..

However some systems are not setup with dual monitor ability and when you connect 2 monitors it will show the same for both and in some cases might do pop up on the sub but most times if they are tied then it is what happens on 1 is the same on the other..