Hikvision NAS NFS format problem

[TELLO]

Hi NG,

sorry - im not so good in english.
I try to connect NAS with the camera web software. If i connect NAS NFS and format, its showing me after the process the whole capacity of the NAS (7TB in my case) and normal.
Later it goes back to capacity 0 and Uninitialized.

I guess its a problem of sharing the NAS with other cams, but i use for each a different folder.

Is there anyway how to fix this problem?

Thanks TELLO

 

[jimmyt]

tello - which nas? Most of us have have good luck with smaller shares and separate shares. For the cameras I beleive the shares need to be separate and dedicated for each camera. For exmaple, I have a 500gb share running now on freenas. I was able to get it up to 900gb with no issue (only have 2 - 1tb drives)- but each "share" was its own dataset in freenas.

 

[Mike]

This thread may help you a bit too - http://www.ipcamtalk.com/showthread.php?54-Solving-some-NFS-issues-on-Hikvision-cameras

 

[TELLO]

I have a QNAP TS-119PII with 7TB. But i have 6 HV Cams - maybe i have to separate and make share for each of them. I will try.

TELLO