Good day to all, been a lurker a long time and have had many issues resolved by lurking, but now the time has come for me to ask a question i cannot find an answer for.
Senario:
DS-9632N-ST NVR with 32 IP Cameras and 4 2TB HDD installed.
1 of the 2TB drives started giving SMART errors and was replaced.
Questions:
How do i get the recorded footage off the drive?
If i plug the drive into a USB cradle it shows up in device management and disk configuration (Windows & Linux) as unallocated space.
What Filesystem does Hikvision use on their NVR's?
If i use any recovery software, i do not see video files, i see some exe files etc.
I know that the DS-9632N-ST has 8 Sata ports and if i plug the drive back into the NVR i would be able to download the footage, problem is the NVR is 800 kilometers away.
Thank you very much for any help that you ladies and gentlemen have to offer.
Senario:
DS-9632N-ST NVR with 32 IP Cameras and 4 2TB HDD installed.
1 of the 2TB drives started giving SMART errors and was replaced.
Questions:
How do i get the recorded footage off the drive?
If i plug the drive into a USB cradle it shows up in device management and disk configuration (Windows & Linux) as unallocated space.
What Filesystem does Hikvision use on their NVR's?
If i use any recovery software, i do not see video files, i see some exe files etc.
I know that the DS-9632N-ST has 8 Sata ports and if i plug the drive back into the NVR i would be able to download the footage, problem is the NVR is 800 kilometers away.
Thank you very much for any help that you ladies and gentlemen have to offer.
