Hi all,
I have NVR HiWatch DS-N208P(C) and IP Camera HiWatch DS-I250W(C), but I can’t set up motion detection for this camera.
I did a full reset of the NVR and camera. After that I added the IP camera again with HIKVISION protocol.
I checked the "Enable motion detection" option. When I tried to save it, I got a tooltip saying "Not associated with own channel".
I also tried checking “Notify Surveillance Center” and “Trigger” channel in the “Communication Action” tab. I got a tooltip that said "Parameter Error".
For me the situation is a little strange. I used this HiWatch camera with Dahua NVR before - it worked perfectly, at the same time another cheaper Noname camera from Aliexpress works fine with this HiWatch NVR, but I had problems with this HiWatch camera and this HiWatch-NVR.
I have NVR HiWatch DS-N208P(C) and IP Camera HiWatch DS-I250W(C), but I can’t set up motion detection for this camera.
I did a full reset of the NVR and camera. After that I added the IP camera again with HIKVISION protocol.
I checked the "Enable motion detection" option. When I tried to save it, I got a tooltip saying "Not associated with own channel".
I also tried checking “Notify Surveillance Center” and “Trigger” channel in the “Communication Action” tab. I got a tooltip that said "Parameter Error".
For me the situation is a little strange. I used this HiWatch camera with Dahua NVR before - it worked perfectly, at the same time another cheaper Noname camera from Aliexpress works fine with this HiWatch NVR, but I had problems with this HiWatch camera and this HiWatch-NVR.
