HongJingTian help

Apr 7, 2019
2
0
Norge
hello
I'm new here and finally I found a place I maybe gets help.
I got 2 cameras from a friend of mine,
Hongjingtian 6200 B-2 I think it was.
I log in with the IP 192.168.1.88 and it seems ok. can adjust quality and so on..
However I struggling with a couple of things..
This camera comes with a yellow, Black and Red RCA. is this for a computer or what? can I Use wifi? I tried to connect only the yellow cable to an old plasma wit RCA input but there was no image so maybe I need a setup specific. I have lost user manual and this..
I have both a Mac and Windows 10 computer.. maybe I should install something?

And for the grand finale.. The one camera is set up before from my friend and lost password. the question here.. where the f... in h... is that reset button.. I have torn the Cam in to thousand pieces and don't fint it. Other cameras have this in there cable or something but not this.
Any help/info om the cam is awesome..

Thanks cheers..Sorry for the bad English

some info from the cam that work


Device information
device type C6F0SgZ0N0P0L0

software
V10.1.10.2.1-20170524

Webware Version: V1.0.1
 
connectors other than Ethernet on such a cam might be audio in/out and or alarm/in/out.
alarm connections are typically bare wire tho, so i'd guess your red/black RCA's are for audio.
as you suspected, yellow is typically for analog video output, and may need to be enabled from the cam's UI...

you don't have the admin password, yet you can log into the ui? and pull the video stream? please clarify...
 
Sometimes the reset button is inside the camera. There's a good chance this same camera is re-branded under dozens of different names.
I don't know that I'd recognize it, but if you post some pictures of the camera and screenshots of the web interface someone might.
 
I have two camera of the same type. one I don't know password.
have this built in mic? I connected the little thing with a wirless mark on. thought that was camera