Very long story short, I am trying to use HikVision's built in motion sensing to trigger an event in ZoneMinder.
Running firmware 5.2.5 on all my cameras. Have full command line access. Just need to figure out where to splice in my custom code when a motion event starts. Any ideas?
For those are wondering, this involves sending a string (1|on+20|1|External Motion|External Motion) to port 6802 on my zoneminder server:
https://wiki.zoneminder.com/How_to_use_your_external_camera's_motion_detection_with_ZM
In my case this would look something like (As tested on my DS-2CD2132-I)
Running firmware 5.2.5 on all my cameras. Have full command line access. Just need to figure out where to splice in my custom code when a motion event starts. Any ideas?
For those are wondering, this involves sending a string (1|on+20|1|External Motion|External Motion) to port 6802 on my zoneminder server:
https://wiki.zoneminder.com/How_to_use_your_external_camera's_motion_detection_with_ZM
In my case this would look something like (As tested on my DS-2CD2132-I)
Code:
# echo "1|on+20|1|External Motion|External Motion" | /dav/nc 192.168.0.5 6802
1|on|1463784221|6067
1|off|1463784243|6067