How to tell camera model?

[TundraCam]

I logged in to the web interface for a couple of cameras to get the model number and couldn't find it anywhere. Is it there and I missed it? Some other way to tell the model #?

Thanks,

 

[looktall]

On mine it's under information--> version--> Device type.

 

[TonyR]

+1^^.
But IF you're feeling fancy, issue the following HTTP command with a browser and you'll get YOUR response; mine is at the bottom:

http://username:password@Camera-IP/cgi-bin/magicBox.cgi?action=getSystemInfo

appAutoStart=true
deviceType=IPC-HDW5442TM-AS
hardwareVersion=1.00
processor=HI3516DV300
serialNumber=????????????
updateSerial=IPC-HDW5442TP-AS

 

[TundraCam]

Thank you both.

On mine it's under information--> version--> Device type.

Not on mine. It seems Amcrest has it but Dahua not on the cameras I've checked.

 

[TundraCam]

http command returned devicetype=IP Camera.

:-(

 

[TundraCam]

This is where I'm wishing that I'd kept a spreadsheet of all cameras...

 

[TheOtherMike]

One of my camera's "deviceType" got whacked in a firmware update, but the "updateSerial" is good.
Using the command provided above:

deviceType=IPC hardwareVersion=1.00 processor=AX620D serialNumber=9E09E25nunya updateSerial=IPC-HFW5442E-ZE-0832 updateSerialCloudUpgrade=IPC-HFW5442E-ZE-0832

Another of the same camera type has the expected deviceType:

deviceType=IPC-B54IR-Z4E-S3 hardwareVersion=1.00 processor=AX620D serialNumber=9K0D7ACnunya updateSerial=IPC-HFW5442E-ZE-0832

 

[looktall]

One of my camera's "deviceType" got whacked in a firmware update

So did mine but a subsequent update brought it back.

 

[bentson]

+1^^.
But IF you're feeling fancy, issue the following HTTP command with a browser and you'll get YOUR response; mine is at the bottom:

http://username:password@Camera-IP/cgi-bin/magicBox.cgi?action=getSystemInfo

appAutoStart=true
deviceType=IPC-HDW5442TM-AS
hardwareVersion=1.00
processor=HI3516DV300
serialNumber=????????????
updateSerial=IPC-HDW5442TP-AS

Thank you!! My camera model isn't written anywhere in the GUI and this worked
Why don't they just write the model number in the GUI

 

[TonyR]

Why don't they just write the model number in the GUI

Too much code!
</end sarcasm>