HP prodesk 600 power on in bios
- Thread starter Cameraguy
- Start date
IAmATeaf
Known around here
I have, also have it set to ignore no keyboard/mouse as well else it will hang with at a prompt and stop booting.
- Feb 15, 2017
- 1,502
- 1,159
- Feb 15, 2017
- 1,502
- 1,159
I checked my pfsense box, it's not there. However, if I unplug the AC, wait and plug it back in, it starts booting (unlike older HP systems)... So, it appears to be "built-in" 
IAmATeaf
Known around here
Sorry can’t really check the settings as the PC is in the loft and runs without a keyboard, mouse and screen.
- Feb 15, 2017
- 1,502
- 1,159
IAmATeaf
Known around here
I’ve just checked the BIOS file that I exported, there is a setting in there called “After power loss” and I have it set to Power on.
As I said before you also need to find the option that would disable the boot if no keyboard is plugged in as well.
As I said before you also need to find the option that would disable the boot if no keyboard is plugged in as well.
- Feb 15, 2017
- 1,502
- 1,159
IAmATeaf
Known around here
In that case just find the option after power loss.
Just a thought but if you can’t find it it might be worth trying a BIOS upgrade? I run the latest as if a few months ago.
Just a thought but if you can’t find it it might be worth trying a BIOS upgrade? I run the latest as if a few months ago.
IAmATeaf
Known around here
- Feb 15, 2017
- 1,502
- 1,159
- Feb 15, 2017
- 1,502
- 1,159