First of all I’m a newbie, I don’t have much experience. Please I have issues with simicam h.256+ nvr. The nvr has 16 Poe ports. I connected all 16 cameras to the port, but the nvr can’t find the up address of these cameras. Initially it was working fine, it searches automatically and dedicate addresses to the cameras. But I tried to connect internet to the nvr so I can have remote view, but once the I did that, the ip address of all the cameras dissapeared, and now it can’t find the ip address of these cameras anymore. Please help.
IP camera
- Thread starter Sunnykull044
- Start date
Disconnect all cameras.
Plug in only ONE camera.
Wait until the NVR sees it.
In NVR menu, Add it. View it.
Plug in another camera and do the same as above.
Wait until the second camera is seen, add it and view it.
When you have 8 cameras added and successfully viewed, connect NVR's LAN port to your router.
Report back.
Plug in only ONE camera.
Wait until the NVR sees it.
In NVR menu, Add it. View it.
Plug in another camera and do the same as above.
Wait until the second camera is seen, add it and view it.
When you have 8 cameras added and successfully viewed, connect NVR's LAN port to your router.
Report back.
