IPC-HDW5231R-ZE Issues

tul9033

n3wb
Joined
Jul 18, 2014
Messages
29
Reaction score
9
Location
Tulsa, OK
I have 4 Device Type IPC-HDW5231R-ZE
System Version V2.800.0000010.0.R, Build Date: 2019-08-07

Having 2 main issues. First on the playback screen using the latest version of Firefox there is no markers for the timeline. IE the timeline markers are present.
Screenshot_2020-06-08 Playback.png

2nd the DST and NPT setting will save for about 5 minutes and then go back to unchecked.
Screenshot_2020-06-08 Setting.png

Any ideas? Thanks!
 

IAmATeaf

Known around here
Joined
Jan 13, 2019
Messages
3,287
Reaction score
3,252
Location
United Kingdom
If it isn’t the above then try giving the cam a reboot and try again, if that still doesn’t work try resetting it to default but make a backup of the settings first. Then try setting it and see if it sticks, then finally import your settings and again check to see if thy settings stick.
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
8,262
Reaction score
23,723
Location
HONGKONG
I have 4 Device Type IPC-HDW5231R-ZE
System Version V2.800.0000010.0.R, Build Date: 2019-08-07

Having 2 main issues. First on the playback screen using the latest version of Firefox there is no markers for the timeline. IE the timeline markers are present.
View attachment 63428

2nd the DST and NPT setting will save for about 5 minutes and then go back to unchecked.
View attachment 63429

Any ideas? Thanks!
flash this latest new firmware asap, there has some serious attack for the old firmware.
 

tul9033

n3wb
Joined
Jul 18, 2014
Messages
29
Reaction score
9
Location
Tulsa, OK
Thanks for the replies guys . Yes, I am clicking save. As part of the process I upgraded the firmware, reset to factory defaults, and set the cameras up from scratch. Still no go, it will update via NTP once and appears to hold the setting for about 5 minutes then after a few refreshes the checks for DST and NTP go to unchecked.
 
Top