IPC-HFW1831E IPC-HX2(1)XXX-Sag_Eng_PN_V2.800.0000000.7.R.210708.zip

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
5,832
Reaction score
14,015
Location
HONGKONG
Just get the latest new firmware, guys can download and make a updating,

Firmware for these models ONLY.

IPC-HFW1831E
IPC-HDBW2831R-ZS
IPC-HDBW2831R-ZAS
IPC-HDBW1831R-S
IPC-HDBW1831R
IPC-HFW2831T-ZAS
DH-IPC-HFW2831T-ZS

Bug Fixed:


Fixed occasional audio failure


Access information:
This version fixes some bugs,improves the product performance, and strengthens product security on the basis of the last version
 

Attachments

Last edited:

TRAVMO.

n3wb
Joined
Mar 5, 2020
Messages
4
Reaction score
6
Location
Sacramento
Where can I get 4/4?
 

KCO

Young grasshopper
Joined
Dec 28, 2019
Messages
30
Reaction score
10
Location
Santiago
I have 2.622.0000000.23.R, Build Date: 2019-11-01 @ 11264 Kb/S

update: Now i tried 2.622.0000000.8.R, Build Date: 2018-07-31 @ 15104 Kb/S
and V2.800.0000000.5.R, Build Date: 2020-01-07 @ 8192 Kb/S

I keep the 2018 version, the image is vibrantly sharp, with the last one I have compatibility with the brave browser but it looks like a watercolor and supposedly only fixes audio problems in any case to my liking it is not worth it.
 
Last edited:

msquared

Getting the hang of it
Joined
Oct 15, 2016
Messages
114
Reaction score
65
KCO, just for clarification, you tried these different firmwares on IPC-HFW1831E? The progression reads as if you updated to a 2.800 firmware but was able to go back to a 2.6xx version?
 

KCO

Young grasshopper
Joined
Dec 28, 2019
Messages
30
Reaction score
10
Location
Santiago
KCO, just for clarification, you tried these different firmwares on IPC-HFW1831E? The progression reads as if you updated to a 2.800 firmware but was able to go back to a 2.6xx version?
Yes and in that same order, I did this through the NVR web interface as soon as I saw this thread.

Sorry for not answering before but if you have problems could try V2.800.0000000.2.R, Build Date: 2019-04-04 @ 11264 Kb / S
so as not to get stuck in the latest version.
 

msquared

Getting the hang of it
Joined
Oct 15, 2016
Messages
114
Reaction score
65
Thank you for the information.

You were able to roll back a 2.8xx firmware to 2.6xx using an NVR?

Are your cameras connected directly to your NVR?

I encountered some issues I didn't like when going from 2.6 to 2.8, but cannot roll back, at least using the camera's web interface.
 
Last edited:

KCO

Young grasshopper
Joined
Dec 28, 2019
Messages
30
Reaction score
10
Location
Santiago
Thank you for the information.

You were able to roll back a 2.8xx firmware to 2.6xx using an NVR?

Are your cameras connected directly to your NVR?

I encountered some issues I didn't like when going from 2.6 to 2.8, but cannot roll back, at least using the camera's web interface.
From 2.8 to 2.6 no, as I told you and I am currently on the version of April 4, which is the downgrade that I recommend if you have already updated to the latest
maybe bypass with a hex editor is possible...
 

Donut17

n3wb
Joined
Dec 20, 2019
Messages
6
Reaction score
1
Location
Kentucky
I finally installed my IPC-HFW2831T-ZS (from Andy) running 2.622.0000000.18.R, Build Date: 2019-01-09
What is the recommended FW at this point?

Is upgraded the FW through the camera interface (Internet Explorer) the best option?

Thanks!
 

Eagle29

Young grasshopper
Joined
Nov 29, 2019
Messages
37
Reaction score
5
Location
Colorado
Is this firmware good for HFW 1831 camera's? seeing there were issues earlier.
 

Eagle29

Young grasshopper
Joined
Nov 29, 2019
Messages
37
Reaction score
5
Location
Colorado
1) Do we still need to do reset the settings by going into System > Default > Default/Factory Default?
2) Also does anyone has a camera settings that they tweaked the camera for better results? I am trying to understand different Camera > Conditions, Camera > Video etc
3) And Event > IVS (trying to figure difference between Tripwire and intrusion)
 

MikeyTech8

Getting comfortable
Joined
Apr 30, 2019
Messages
136
Reaction score
57
Location
Oceania
3) And Event > IVS (trying to figure difference between Tripwire and intrusion)
I don't the IVS for the 1831/2831 works and I think the engineers accidentally put this feature there. I've tried enabling IVS for these two cameras and nothing works plus the spec sheet does not say it supports IVS.
 

arium76

n3wb
Joined
Feb 3, 2019
Messages
16
Reaction score
10
Location
Australia
It wo
I don't the IVS for the 1831/2831 works and I think the engineers accidentally put this feature there. I've tried enabling IVS for these two cameras and nothing works plus the spec sheet does not say it supports IVS.
It works fine you need to disable smart codec. Also need to enable it under schedule recording.
 

MikeyTech8

Getting comfortable
Joined
Apr 30, 2019
Messages
136
Reaction score
57
Location
Oceania
It wo

It works fine you need to disable smart codec. Also need to enable it under schedule recording.
Got it working. Though, the detection for the IVS Intrusion seems to be getting a lot of false alerts. Eg, my driveway where my cars are parked. The front window of my car reflects the skys/clouds movement which IVS intrusion seems to be capturing/getting alerted by this. Have tried to also make the square size small and big but issue persist. So far, only using the tripwire.
 

Eagle29

Young grasshopper
Joined
Nov 29, 2019
Messages
37
Reaction score
5
Location
Colorado
Has anyone tried the new firmware on this camera - General_IPC-HX2(1)XXX-Sag_Eng_NP_V2.800.0000000.7.R.210708?
 
Top