IPC-T3241T-ZAS SMD 3.0 Latest new firmware IPC-HX3XXX-Leo_MultiLang_PN_Stream3_V2.800.0000000.37.R.220118.bin

chip_

n3wb
Joined
Jan 15, 2021
Messages
21
Reaction score
14
Location
Oregon
Is this the latest firmware for this device?

Device Type IPC-T3241T-ZAS

System Version V2.800.0000000.14.R, Build Date: 2020-06-12

WEB Version 3.2.1.907431

ONVIF Version 19.06(V2.6.1.845551)

S/N 6L0499CPAG4F976

Algorithm Version 1.0.2

Security Baseline Version V2.0
 
Joined
Dec 30, 2016
Messages
730
Reaction score
479
Location
Somewhere in the space/time continuum
Is this the latest firmware for this device?

Device Type IPC-T3241T-ZAS

System Version V2.800.0000000.14.R, Build Date: 2020-06-12

WEB Version 3.2.1.907431

ONVIF Version 19.06(V2.6.1.845551)

S/N 6L0499CPAG4F976

Algorithm Version 1.0.2

Security Baseline Version V2.0
This is the latest, posted by @EMPIRETECANDY :


I have been running it for a couple of weeks now on 2 cameras, with no issues so far. But, as always use at your own risk. FWIW.
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
6,675
Reaction score
17,212
Location
HONGKONG
Fixed camera should be OK, normally PTZ/NVR has risk to flash if the FW version big time difference.
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
6,675
Reaction score
17,212
Location
HONGKONG
Hey guys

The SMD3.0 firmware i just update on the 1st page, welcome to download and upgrade!

Andy
 

civic17

Getting the hang of it
Joined
Dec 7, 2018
Messages
172
Reaction score
58
Location
Canada
Hi Andy,

I was searching firmware for this model IPC-T3241T-ZAS. Currently my camera came with:

System Version V2.800.15OG003.0.R Build Date: 2022-01-18
WEB Version 3.2.1.1179647
ONVIF Version 20.06(V2.9.1.1000915)

At the dahua download center it has DH_IPC-HX3XXX-Taurus_MultiLang_PN_Stream3_V3.000.0000000.8.R.220429 and says compatible with IPC-HDW3241T-ZS-S2 .

Will this version work? Thanks.
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
6,675
Reaction score
17,212
Location
HONGKONG
Hi Andy,

I was searching firmware for this model IPC-T3241T-ZAS. Currently my camera came with:

System Version V2.800.15OG003.0.R Build Date: 2022-01-18
WEB Version 3.2.1.1179647
ONVIF Version 20.06(V2.9.1.1000915)

At the dahua download center it has DH_IPC-HX3XXX-Taurus_MultiLang_PN_Stream3_V3.000.0000000.8.R.220429 and says compatible with IPC-HDW3241T-ZS-S2 .

Will this version work? Thanks.
They are not the same version, so just use the 2022 Jan version. In Aug will have a new fw to be released.
 

jmltech

n3wb
Joined
Jul 4, 2022
Messages
17
Reaction score
21
Location
Colorado, USA
Hey guys

The firmware for the IPC-T3241T-ZAS has been released. Has some big update, try to update it.

Andy
Hi @EMPIRETECANDY
where is the firmware located from your July 20th, 2022 message? When I click on the link, it takes me to the product page at the IPCAMtalk store, but there isn't a tab or link for the latest firmware. You firmware on message #1 has a download link that says it has been deleted.
 
Joined
Dec 28, 2019
Messages
10,953
Reaction score
25,928
Location
New Jersey

jmltech

n3wb
Joined
Jul 4, 2022
Messages
17
Reaction score
21
Location
Colorado, USA
Thanks. I cleared my web cache and re-logged into ipcamtalk. The download is now working. Previously it gave an error that the file couldn’t be found… hence the reason I thought the file was deleted.

this is the camera I won from Andy’s lottery. Just got it going this morning and am having problems with focusing. If I zoom in a little, the focusing goes all the way to one extreme, then back to the other, then tries going in and out about 5 times before settling, but not quite focused. Hoping a firmware update will help, since resetting to defaults a couple of times didn’t make a difference.
 

looney2ns

IPCT Contributor
Joined
Sep 25, 2016
Messages
13,509
Reaction score
17,911
Location
Evansville, In. USA
Thanks. I cleared my web cache and re-logged into ipcamtalk. The download is now working. Previously it gave an error that the file couldn’t be found… hence the reason I thought the file was deleted.

this is the camera I won from Andy’s lottery. Just got it going this morning and am having problems with focusing. If I zoom in a little, the focusing goes all the way to one extreme, then back to the other, then tries going in and out about 5 times before settling, but not quite focused. Hoping a firmware update will help, since resetting to defaults a couple of times didn’t make a difference.
Focus depends on your field of view, and what object it is focusing on.
You can use "Easy Focus" to tell it where to focus in the FOV.
1661884094375.png
 

jmltech

n3wb
Joined
Jul 4, 2022
Messages
17
Reaction score
21
Location
Colorado, USA
Focus depends on your field of view, and what object it is focusing on.
You can use "Easy Focus" to tell it where to focus in the FOV.
View attachment 138430
I don't have an icon on the main 'live' screen for easy focus. The only two icons I have is a camera (for snapshot) and a speaker (for audio)
I did update the firmware... it was the same firmware that was already on the camera as shipped.

Under "Settings", "Camera", "Conditions", then on the "Zoom and Focus" tab there is a button on the bottom of camera view that has the same symbol as what you show, which says "Auto Focus". I tried that and it worked well. Thanks for the pointer.AutoFocus.jpg
 
Top