IPC-T5442T-ZE how to setup recording to SD card?

ozcam

n3wb
Joined
Jan 2, 2021
Messages
13
Reaction score
4
Location
USA
I have IPC-T5442T-ZE connected to a router. I navigated my browser to and verified the camera is set for SD card recording. However when I try to play from the SD card there is no recording. What am I missing?

Screen Shot 2021-01-24 at 7.51.48 PM.png
Screen Shot 2021-01-24 at 7.30.44 PM.png
Screen Shot 2021-01-24 at 7.30.12 PM.png
Screen Shot 2021-01-24 at 7.57.19 PM.png
Screen Shot 2021-01-24 at 7.57.34 PM.png
 

wittaj

IPCT Contributor
Joined
Apr 28, 2019
Messages
24,428
Reaction score
47,544
Location
USA
Try changing to smart plan and IVS and then have someone walk in front of the camera while you watch the screen and confirm you get the box around them and it triggers. I am wondering if your sensitivity and thresholds are wrong and it isn't actually triggering to record.
 
Joined
Aug 8, 2018
Messages
7,386
Reaction score
25,889
Location
Spring, Texas
I have no problems with my SD card recordings.

All of your settings are the same as mine except the Pre-Event Record under Storage/Record Control, I have 3 you have 5, and under Schedule/Record I do not have the green bars, only the yellow and red.

My card is a SanDisk High Endurance 128GB card.

You might try and formatting the card all over again.
 

wittaj

IPCT Contributor
Joined
Apr 28, 2019
Messages
24,428
Reaction score
47,544
Location
USA
Oh that is why probably - the camera needs to be able to identify a human and you are too close doing it that way. Walk away and back. It will not trigger that close unless you are walking up to it and it can identify it is a human and then trigger.
 

ozcam

n3wb
Joined
Jan 2, 2021
Messages
13
Reaction score
4
Location
USA
The card failed during formatting while in the camera so I ordered a new card. Thank you all for help.
 

pozzello

Known around here
Joined
Oct 7, 2015
Messages
2,270
Reaction score
1,117
yes, i was going to suggest showing us the 'storage' SD card page, which would have told us the card was not seen/formatted.

sometime, if you format the card in your PC first, it'll then work in the cam...
 

oknoob

Getting the hang of it
Joined
Feb 5, 2020
Messages
121
Reaction score
83
Location
Florida
How is the set up when using the nvr too? Any special or different setting?
 

wittaj

IPCT Contributor
Joined
Apr 28, 2019
Messages
24,428
Reaction score
47,544
Location
USA
Nope - set-up the IVS and what not in the camera GUI and then just let the NVR record based on the triggers that the camera gives it.
 
Top