Is it normal to heave two IP entries for the NVR?

[wittaj]

Sheesh, you don't know until you know. My intentions were good. Sometimes I'm stubborn in my process

By the way, when I initialized the Dahua NVR after doing the updates, I chose NOT to enable P2P. How do I enable it to use the DMSS app?

You can enable P2P at any time by going into the NVR GUI.

But you can use DMSS app without P2P enabled, just when not home you won't be able to connect unless you VPN back into your network.

 

[TonyR]

I thought I was being careful. Didn't want to inadvertently post info I shouldn't.

Well sure, that's being smart and if you weren't sure then you did the right thing, IMO....kudos!

 

[Timokreon]

I came from Lorex NVR to a Dahua as well. Take the Lorex out and go to the Dahua today. Setting things up with that Lorex can make a mess of things with the Dahua.

 

[bigredfish]

Sheesh, you don't know until you know. My intentions were good. Sometimes I'm stubborn in my process

By the way, when I initialized the Dahua NVR after doing the updates, I chose NOT to enable P2P. How do I enable it to use the DMSS app?

Go to networking P2P on the NVR and enable

Then in DMSS when you go to add the NVR, use “manual” (not IP/Domain), and use the NVR serial number shown on the P2P screen to add it to DMSS