LPR refine settings
- Thread starter brad9dk32
- Start date
bigredfish
Known around here
That may be the worst angle Ive seen.
That said, you could experiment. Distance?
Id bump Gain up for starters
That said, you could experiment. Distance?
Id bump Gain up for starters
Yes, very readable during day.
Attachments
The problem you have, and will continue to get worse as more states change the way plates are made, is that the infrared isn't bouncing back to the source and is instead reflecting off.
It is making it even more critical to get straight on shots, or even better add white light to get it in color.
ipcamtalk.com
ipcamtalk.com
It is making it even more critical to get straight on shots, or even better add white light to get it in color.
Poor IR contrast in new Tennessee license plates
I've noticed an issue with nighttime capture of new 2022 Tennessee license plates. The white lettering on a blue background washes out almost completely in IR light, making the plates barely readable. Has anyone encountered similar issues with other plates? I'm wondering if additional IR...
Gotcha 3M Printed Plates at Night - LPR
As many of us have experienced, and well documented in this thread, that the 3M printed plates, especially those with blue in them, are very difficult to get with infrared. Unlike the stamped/raised plates, these printed plates do not have the same reflective properties and the flat nature of...
Looks like the only other car that went by last night which was at 2:45am had readable plate it just wasn't found by codeproject.ai , Another camera angle shows it was local police making rounds. So I'm close to what I can get with my limitations.