Missing 90 deg flip

bug99

Pulling my weight
Joined
Dec 27, 2016
Messages
397
Reaction score
154
It appears that my DH-IPC-HFW5231E-Z5 does not support a 90 (or 270) flip to corridor mode. Am i missing something, or is this a feature drop? Flip mode 1 and 2 fail and in the browser interface i only see 0 and 180). The data sheet shows 90 and 270 however, and it is the same firmware as many of the other cams (2.622.0000000.18.R).
 

anijet

Pulling my weight
Joined
Mar 10, 2014
Messages
346
Reaction score
165
Location
CA
My 5231 and 2231 has it on the "Camera" "Conditions" tab. Titled Mirror and Flip.
 

bug99

Pulling my weight
Joined
Dec 27, 2016
Messages
397
Reaction score
154
So does mine. It just fails on the Z5, or is missing on the browser version.

upload_2018-12-16_13-55-20.png
upload_2018-12-16_13-57-14.png
 

tigerwillow1

Known around here
Joined
Jul 18, 2016
Messages
3,816
Reaction score
8,424
Location
USA, Oregon
My 5231E-Z (not Z5) does the 90 degree flip, from the camera interface or the nvr interface. Firmware version is 2.640.0000002.0.R and the plugin version is 3.3.16431.579279. A fixed focal length starlight I have also does 90 deg with 2.622.0000000.23.R firmware and plugin version 3.3.11053.389223. This is with Pale Moon .
 

philisher1

n3wb
Joined
Apr 3, 2019
Messages
10
Reaction score
6
Location
The moon
Flip fixed.... work around
I just bought a DH-IPC-HDBW3541F-AS-M and the flip didn’t work on my camera either I upgraded to the newest firmware still no improvement, until I reduced the resolution to 1080p. 5mp Camera at 1080 not so good.
 
Top