Network Card

Mac25

n3wb
Joined
Aug 14, 2016
Messages
19
Reaction score
11
Location
Ms Gulf Coast
need a good dependable card, mostly used intel way back, been out of pc hardware to long, only
need single port, going in home cam server so needs to run cool, altho server runs on cool side.
 

TonyR

IPCT Contributor
Joined
Jul 15, 2014
Messages
16,436
Reaction score
38,154
Location
Alabama
Stick with intel.
Yes, and Intel does make some nice dual port cards; that would facilitate the OP putting his Internet/home LAN on one port (subnet A) and his cams on the other port (subnet B) to isolate them from the Internet.

He did say he was looking for a single port card but I see in his profile he uses BI so since he's opening up the PC it would be a good time to consider it.
 

sebastiantombs

Known around here
Joined
Dec 28, 2019
Messages
11,511
Reaction score
27,690
Location
New Jersey
If one more port is good, two more ports are better. Cost and power consumption are just a little bit higher, but not really significant. Having another spare ethernet port can come in handy at times.
 

Mac25

n3wb
Joined
Aug 14, 2016
Messages
19
Reaction score
11
Location
Ms Gulf Coast
can the card be pre-setup for subnet lan and ready to test with a spare cam before i move all my cams ?
would like to have this ready so the cams are not down but a very short time.
 
Top