Model: DS-7604NI-K1 / 4P
Firmware: V3.4.82 build 161028
Camera Resolution: 2688*1520
Hi everyone,
I currently have the above mentioned NVR with 4 cameras connected to it plugged into a 4k monitor. I have set the output resolution of the NVR to 4k, but when viewing all the cameras in a 2x2 grid configuration the camera resolution is very low. It looks like it is only outputting the substream, is there any way to make it output the mainstream as the monitor should be able to display four 1920x1080 cameras at once.
Cheers.
Firmware: V3.4.82 build 161028
Camera Resolution: 2688*1520
Hi everyone,
I currently have the above mentioned NVR with 4 cameras connected to it plugged into a 4k monitor. I have set the output resolution of the NVR to 4k, but when viewing all the cameras in a 2x2 grid configuration the camera resolution is very low. It looks like it is only outputting the substream, is there any way to make it output the mainstream as the monitor should be able to display four 1920x1080 cameras at once.
Cheers.