NVR5416-16P-4KS2E Camera Access

[WA3PNT]

I have been using a NVR5216-4KS2 where the cameras were on the same subnet (192.168.0.X) as the NVR. This allowed me to directly access the cameras through the LAN.

I have changed over to a NVR5416-16P-4KS2E, and now the Cameras are on a 10.1.1.X subnet, with the NVR on the 192.168.0.X subnet.

I read in a post somewhere that it is possible to access the Cameras, even though they are on the 10.1.1.X subnet, but I cannot find that post.

I need to make some changes to the Camera configurations that will not take through the NVR (Presets on non-Dahua cameras)

Can someone please point me to the thread where the Camera access was discussed?

Thanks
RodeoGeorge

 

[WA3PNT]

I think I found the info, after reading 950 posts to this thread.
Camera access through Registration Page

 

[c hris527]

I think I found the info, after reading 950 posts to this thread.
Camera access through Registration Page

I think you have