nz4rn-34718

Yerso

n3wb
Joined
Jan 20, 2022
Messages
2
Reaction score
0
Location
Almaty, Kazakhstan
Hello. I bought a nz4rn-34718 camera. when restarting the camera, it goes back to the original position of the camera. i.e. the position and zoom are reset. Is it possible to save the camera position so that when the camera is turned on, the position and zoom did not change? it is not convenient to set the cameras in the right direction every time.
 

TonyR

IPCT Contributor
Joined
Jul 15, 2014
Messages
16,451
Reaction score
38,164
Location
Alabama
That cam is re-branded for many suppliers.

Try opening the cam's embedded webGUI and on the live view page should be the PTZ controls. One of the presets, possibly #1, should be the "Home" position or perhaps "Home" is labeled.

If so, position the cam where you want that "Home" place to be and "Add" or "Save" that position to that preset, either "Home" or "1".
 
Top