Hi everyone,
I bought a used camera because of the PTZ and optical zoom feature. It has web interface, IP services and old PAL/NTSC output as well![Smile :) :)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
After the initial setup I noticed that on fixed places of the RTSP stream thre are non transparent grey boxes. They have different size, some are overlapping each other. I checked every setting. Cleared image settings, reset, seached for privacy mask but nothing is enabled. If I rotate the camera the boxes remain on the same position, maybe the size is changing a little. Looks like a software feature not a hardware issue. Is maybe the CCD broken?
I tried changing the resolution, framerate but it had no effect.
Today I plan buying a BNC connector and connect with it to TV to see if on that output option are also hidden parts.
Did anyone had the same issue?
Thanks,
George
I bought a used camera because of the PTZ and optical zoom feature. It has web interface, IP services and old PAL/NTSC output as well
After the initial setup I noticed that on fixed places of the RTSP stream thre are non transparent grey boxes. They have different size, some are overlapping each other. I checked every setting. Cleared image settings, reset, seached for privacy mask but nothing is enabled. If I rotate the camera the boxes remain on the same position, maybe the size is changing a little. Looks like a software feature not a hardware issue. Is maybe the CCD broken?
I tried changing the resolution, framerate but it had no effect.
Today I plan buying a BNC connector and connect with it to TV to see if on that output option are also hidden parts.
Did anyone had the same issue?
Thanks,
George