Only 3 camera model options for amcrest

[freqz]

I'm been having issues running my Amcrest IP3M-HX2 cameras. I've been having the freezing issues others have had so I went to look at the model's as others had suggested that by changing the model would potentially correct the issue.

Well I went in and looked and I only have 3 options in the drop down for Amcrest. ( I've attached a screenshot as well )

I have completely uninstalled BlueIris, Wipe all registry entries etc. Rebooted made sure everything is clean, Downloaded directly again from their website ( Version 4.5.9.11 ) And I still do not see any more model/options to choose.

Any suggestions ?

 

[looney2ns]

What happens when you use Find/Inspect instead of manually setting up.

 

[freqz]

Tried that and no video or sound

Opening 192.***.*.*** port 80...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
2017-08-28T05:48:44.000Z
Requesting device information...
Bad response
GetCapabilities...
Querying services
Has Search services: /onvif/search_service
Has Imaging services: /onvif/imaging_service
Has media services: /onvif/media_service
Has RTP_RTSP_TCP, requesting profiles
Has Event services: /onvif/event_service
RelayOutputs: 0
InputConnectors: 0
Has Device IO services: /onvif/deviceIO_service
AudioOutputs: 1
Opening 192.***.*.*** port 8999...
ONVIF GetSystemDateAndTime
HTTP 12029
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
RTSP port open?
RTSP port detected!
Done