Hi,
Trying to set up Dahua NVR (HCVR5104C) to connect to ONVIF Device Manager. Every time I attempt to connect on http://x.x.x.x:8080/onvif/device_service, I receive an "401 Unauthorized" message by the NVR (using admin creds).
I noticed that no parameters exist in the web interface that would imply anything about enabling ONVIF on the device or setting up ONVIF users (as per the manual). Could I be using wrong firmware or something? The device should support ONVIF and the fact that I am able to reach to that particular web service on port 8080 seconds that.
The device model is: DHI-HCVR5104C-S2
Firmware: 3.200.0004.6, Build Date: 23-11-2015
I might be getting paranoid but I found something on the Internet saying that ONVIF has been tested with firmware DH_HCVR5x04-S2_Eng_P_V3.200.0004.5.R.20151016 on this model. And this "R" letter in the firmware revision is something that I don't have on mine.
Thanks.
Trying to set up Dahua NVR (HCVR5104C) to connect to ONVIF Device Manager. Every time I attempt to connect on http://x.x.x.x:8080/onvif/device_service, I receive an "401 Unauthorized" message by the NVR (using admin creds).
I noticed that no parameters exist in the web interface that would imply anything about enabling ONVIF on the device or setting up ONVIF users (as per the manual). Could I be using wrong firmware or something? The device should support ONVIF and the fact that I am able to reach to that particular web service on port 8080 seconds that.
The device model is: DHI-HCVR5104C-S2
Firmware: 3.200.0004.6, Build Date: 23-11-2015
I might be getting paranoid but I found something on the Internet saying that ONVIF has been tested with firmware DH_HCVR5x04-S2_Eng_P_V3.200.0004.5.R.20151016 on this model. And this "R" letter in the firmware revision is something that I don't have on mine.
Thanks.