Port forward rules

[cdtek101]

Hope I got this in right section;

I have a Netgear CG4500BD Modem/Router
I have 13 cams. (just got last 4)

I cant add another port forward rule (limited to 9)
so I cant add additional cams in port forwarding.

I can't make a range like 8110-8114 because it calls
for a ending Ip address ( 192.168.0. xxx ). (* see pic )

Suggestions ????

 

[SyconsciousAu]

Instead of forwarding every camera to the internet, why not just forward your NVR and view each of the cameras via the web interface of the NVR?

 

[cdtek101]

Ok so if I understand.....

If I don't need to assign a port forward for each camera.

But what port do I input in camera when it says port ?

In blue iris I took out the port #,
i can see the camera inside and outside network...
but the camera ip in blue iris defaults to port 80 in configuration ?

I set another cam the same way defaulting to port 80, it works also.

How many cameras can be on one port number ???

 

[cdtek101]

Ahhhh Ha...figured it out....don't even need port forward since I have no need to log into each camera from outside my LAN....I can see all cams
outside through Blue Iris web server...

Thanks..SyconsciousAu

 

[SyconsciousAu]

Ahhhh Ha...figured it out....don't even need port forward since I have no need to log into each camera from outside my LAN....I can see all cams
outside through Blue Iris web server...

Thanks..SyconsciousAu

No worries. Glad I could help out.