Power and poe

[Opeth]

Hello everyone. Im planning to install a dahua VTO6521K to my building and my question is: is it ok to power it with 12vdc as needed and add it to poe switch for the network? To work with all vth to the same network? I will have a problem with vdc and poe at the same time?
Thank you

 

[ludshed]

It’ll tell the switch it only needs network and not power if you go the 12v route. Seeing as how that vto has no local storage having it powered off of gate PSU, if it has a bbu, and the switch is on a different circuit would give you some redundancy.