Problem with motion detection Dahua Outdoor Station VTO 2101E-P-S1

Teun

n3wb
May 11, 2023
2
0
Nederlands
Hello to all,
I'm new on this site, my base is in the Netherlands.
Mabey some specialist can help with the problem that my VTO 2101E-P-S1 outdoor station will not record wen motion is detected.
On the NVR 5208 -8P-4KS2E everting looks OK, activate MD setup, setup timetable, setup the region for MD, but no registration/record of MD.
My other 3 cam's works fine with the motion detection.
Continue record is no problem, that is working.

Before the Dahua model VTO 2101E-P-S1 I had the VTO2111D WP with this model it was no problem to configurate motion detection and it works.

hope somebody has A suggestion?

Thanks in forcast for the replays

Best regards,
Teun
 
I recently had this problem with a clients NVR5216-16P-4KS2 where one cam wasn't able to record motion anymore.

I solved it this way:
In the NVR GUI go to Alarm -> Video detection -> Period (Schema in Dutch) -> Standard (bottom left corner of the new pop-up screen) -> Save -> Save

Somehow the period settings got lost and I think it is a bug of sorts in the firmware.
 
  • Like
Reactions: JDreaming
Hi Jarrow, Thanks for reply.
My NVR GUI it's: Alarm -> Video detection -> Period (Schema in Dutch) -> Standard (bottom left corner of the new pop-up screen) -> OK -> popup; "period configuration same as camera" -> OK
It didn't solved the problem, no motion detection record ;-(