Hi all
I was wondering if one of you kind people can shed some light on an issue I am having,
I have a 64GB SD card inserted into my cam and have set up the camera to record locally
Schedule is set to General and Motion
Destination is set to Local
Local set to Disk 1 Status is General and attribute Read/Write
Record control: Record mode is auto ,
Looking at the SD cards used capacity under the Destination/Local tab it the used capacity is climbing as you would expect when its recording footage, but going into the playback area of the camera it shows noting on the timeline at all, running a search says there is no recordings. I have run Smart PSS and it also says there is no recordings
Any i deas?
I was wondering if one of you kind people can shed some light on an issue I am having,
I have a 64GB SD card inserted into my cam and have set up the camera to record locally
Schedule is set to General and Motion
Destination is set to Local
Local set to Disk 1 Status is General and attribute Read/Write
Record control: Record mode is auto ,
Looking at the SD cards used capacity under the Destination/Local tab it the used capacity is climbing as you would expect when its recording footage, but going into the playback area of the camera it shows noting on the timeline at all, running a search says there is no recordings. I have run Smart PSS and it also says there is no recordings
Any i deas?