Rtsp stream crashing on main but not substream

[koenie248]

Hi all,
I have an issue with the rtsp stream crashing

H265
1920x1080
10 fps
Cbr
Bitrate 1500-2000-3000-4000 tried all of it

The interesting thing is that exactly the same settings on substream 2 keep a stable rtsp in vlc but also in my software application.

The mainstream stays longer stable if there is no movement but will crash without movement after about 60 seconds.
If there is movement it’s 10 seconds.

The web gui shows the main stream perfectly and forever without crashing.

Anyone knows why the same resolution and settings work in the substream but not in the main stream?

 

[TheOtherMike]

Maybe VLC's info under Tools->Codec & Statistics will reveal a clue.

 

[TonyR]

Have you tried H.264 ?

 

[koenie248]

Have you tried H.264 ?

Yes and the same happens unfortunately

 

[koenie248]

Maybe VLC's info under Tools->Codec & Statistics will reveal a clue.

Will check and revert

 

[koenie248]

@TheOtherMike - any idea for you based on this?

 

[TheOtherMike]

Sorry, nothing jumps out at me.
Although I'd say the bit rate seems too low at 1585 kb/s. For the same resolution I am running 10240 kb/s (but at 20 frames/s & H264). I run most cameras at 10 frames/s but I just happened to check one set up for 20.
Otherwise I don't see anything notably different from my info.

On edit: I was checking the primary stream. I never use substream 1 and always use substream 2 instead. Here are my stream settings

 

[TheOtherMike]

My VLC info for substream 2