Scheduled Switch Day and Night settings

[korsan]

In Image settings there is an "Switch Day and Night Settings" schedule option.
If I set the start-time to 22:00 and end-time to 01:00, I get a parameter error.
And in the 'Common' tab the "Day/Night Switch" option I get error:"The minimum interval between the start time and the end time is 10 seconds"

The maximum end-time I can set for both options is 23:59:59.
So I can't schedule the camera to display in day mode between 22:00 and 01:00 hours.
Maybe there is a workaround?

 

[LaurentR]

I assume you must have start<end.

If it's just for image settings and for whatever reason you want to do it reversed, just reverse the settings and make sure start<end.

If it's for the night/day mode (i.e. IR cut filter), I think there is any assumption that midnight is during the night so you have to be in night mode.

 

[korsan]

It is for a place that is illuminated from 14:00 to 03:00.
So because of this I wanted to use the day mode during that time.
But the ''End Time" can be set max 23:59:59, I have attached a screenshot.


I can't depend on auto-switch, because the illumination is not very high during 14:00 to 03:00. Hereby the camera switches itself to night mode.