SD5A425XA-HNR question about IVS and Yellow Motion rectangles on same screen
- Thread starter kilopapa
- Start date
Mark_M
Known around here
Color coding of IVS/intelligent rules for Dahua devices from my own experience:
In your image, the camera has correct shown 3 vehicles, but the top box is thinking a tree looks like a vehicle.
- Dark Blue - An IVS rule you have drawn.
- Yellow - Vehicle
- Light blue - Human/person
- Green - Unidentified moving object (Cameras that doesn't have human/vehicle detection).
In your image, the camera has correct shown 3 vehicles, but the top box is thinking a tree looks like a vehicle.
Thanks, that is a help...
What I don't get is that in the other Dahua Cams, the yellow are the detection of MOTION, and can be turned off.
Also, on my screenshot, nothing is moving, i.e. the Thing care and a trash can. Those are usually a MOTION trigger and there is no motion and I have the motion OFF.
Any ideas? OR maybe it is all the louvers that are confusing the cam.....weird set up, I know but just prelim.
kilo
What I don't get is that in the other Dahua Cams, the yellow are the detection of MOTION, and can be turned off.
Also, on my screenshot, nothing is moving, i.e. the Thing care and a trash can. Those are usually a MOTION trigger and there is no motion and I have the motion OFF.
Any ideas? OR maybe it is all the louvers that are confusing the cam.....weird set up, I know but just prelim.
kilo
Mark_M
Known around here
It depends on the generation/year of the camera.
On my Dahua cameras from 2019 they all constantly show a box around vehicles. On my 2023 TiOC it only show a box around a vehicle when it starts moving, then timeout when it's stationary.
Certainly move the camera outside the window for best results. Not only your louvers blocking part of the image, but at night the IR light will glare off the window.
bigredfish
Known around here
^^^^^
THIS
On some years models/FW, it will draw boxes around vehicles and/or people it identifies as such, but wont flash red until they cross/activate the Tripwire/Intrusion etc rule
THIS
On some years models/FW, it will draw boxes around vehicles and/or people it identifies as such, but wont flash red until they cross/activate the Tripwire/Intrusion etc rule
I thank you all...pretty consistent that some F/w, age highlights areas with no motion turned on....
Never have seen this on 4-5 Dahua AI cams from 2021 and on....
I guess a question about firmware is on order, although one is always sent to Andy for that advice.
I think I have the last recommended F/W for this unit?
SD5A425XA-HNR
V2.812.0000032.2.R, Build Date: 2022-08-04
V3.2.1.1283440.P9
If I get, 'your lazy, just look yourself', I understand...I took a peek and, man, it's a F/W jungle, even though well organized.
I know this was a popular PTZ and should be well known as to the last goodl F/W and/or if there was a Web version that maybe fixed my issue.
Thanks all,
Never have seen this on 4-5 Dahua AI cams from 2021 and on....
I guess a question about firmware is on order, although one is always sent to Andy for that advice.
I think I have the last recommended F/W for this unit?
SD5A425XA-HNR
V2.812.0000032.2.R, Build Date: 2022-08-04
V3.2.1.1283440.P9
If I get, 'your lazy, just look yourself', I understand...I took a peek and, man, it's a F/W jungle, even though well organized.
I know this was a popular PTZ and should be well known as to the last goodl F/W and/or if there was a Web version that maybe fixed my issue.
Thanks all,