lrodman
n3wb
Hello! I am attempting to use a Cradlepoint router with a SIM card to deploy a Canon IP camera. My carrier has set up the SIM to assign a static IP to the device. I've gathered that I should set up the router in Pass-Through mode, but I'm not sure what other configuration steps are required. I am accessing the live feeds through ViewCommander NVR which requires an IP, video port and control port, and username/password to access the device. Previously, I've used PocketPORT USB routers with a wifi dongle with a SIM card that would automatically set this up with the only configuration required is setting a username/password. Any assistance or experience with this type of setup would be appreciated. Thanks!