Single Camera view shows scrambled pic

[mvoss]

I am running BI 6.0.8.6.
I have 1 camera that I have cloned twice, have split and am running AOI on the 2 cloned cameras.
All works well except when I double click to open the main camera, that has bee cloned, my screen in BI looks like the attched pic. If I escape out of the single camera view the picture returns as normal. The cloned cameras do not do this when I click on them.

If I disable the cloned cameras the main camera picture is fine in single camera view. Any ideas?

Thank you, Michael

Any ideas?

 

[gwminor48]

Is recording turn on or off on the clones? May not matter anyway.

 

[mvoss]

Is recording turn on or off on the clones? May not matter anyway.

The clones recording is turned on.

I forgot to mention the video for the main camera and clones look fine.

 

[gwminor48]

I guess it depends on how you use your clones. I discovered I had a clone recording which I didn't want since the main camera was already doing the recording. I just use my clones for alerts for USPS or front door. Anyway I'm getting off topic, so maybe one of the experts can chime in with some ideas

 

[mvoss]

I guess it depends on how you use your clones. I discovered I had a clone recording which I didn't want since the main camera was already doing the recording. I just use my clones for alerts for USPS or front door. Anyway I'm getting off topic, so maybe one of the experts can chime in with some ideas

I use the clones for different alerts such as mailbox, etc, that's why I'm using AOI on the clones. I'd bet it's the AOI that is causing the problem. As I had used clones before w/ Version 5.x.x, w/out AOI and didn't have this issue.

 

[mvoss]

Ok, I figured it out. Posting just in case anyone else runs into this.

I had the clone cameras at a differnt image format than the main camera. As soon as I changed the clones to the same image format as the main camera the problem went away.