SmartPSS SN(P2P) behind Firewall

huolsam

n3wb
Joined
Jan 30, 2023
Messages
1
Reaction score
0
Location
Morocco
Hi,

i start securing my company network, and i want to allow SmartPSS to reach all dahua dvr via SN(P2P) option.

i tried to allow all the FQDN below, but it doesnt work.

www.easy4ipcloud.com
www.easy4ip.com
easy4ipcloud.com
easy4ip.com
dms.easy4ipcloud.com
paas-dms-edge-fk.easy4ipcloud.com
smartdeviceproxy-edge-fk.easy4ipcloud.com
devaccess.easyipcloud.com
dus.easy4ipcloud.com
aktualisieren.easy4ip.com
update.easyviewercloud.com
vrs.easy4ipcloud.com
pps.easy4ipcloud.com
das.easy4ipcloud.com
das-fk.easy4ipcloud.com
devicelogserver-fk.easy4ipcloud.com
 

tigerwillow1

Known around here
Joined
Jul 18, 2016
Messages
3,816
Reaction score
8,424
Location
USA, Oregon
No answers, but I have 2 questions:

1) Are you working with the firewall on the NVR end, or the remote end?
2) Why do you think you have to do anything to the firewall at all? I'm far from the expert on this, but as far as I know, if a web browser gets through the firewall, P2P should work.

I'm ok if I end up with foot-in-mouth over comment #2, but I think you should also suspect the smartPss setup. I'm assuming you enabled P2P on the NVR. (I'm also assuming NVR. If it's really a DVR I know nothing about it).
 
Top