Hello all
After a lot of help with @alastairstevenson , I can now get my PC's to see the new camera in a bowser, but still cannot add it to BI --I just get the grey box 'Cam 4 no signal'
However, when I entered the camera ip details & pressed 'find/inspect', Blue Iris reported with :
Opening 192.168.178.34 port 80...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
2011-12-01T00:04:12.000Z
Requesting device information...
Manufacturer: UNIVIEW
Model: IPC3614LR3-PF40-D
FirmwareVersion: IPC_D1202-B0001P75D1705
GetCapabilities...
Querying services
Has Imaging services: /onvif/imaging
Has media services: /onvif/media
Has RTP_RTSP_TCP, requesting profiles
first profile is media_profile1
first source is video_source
requesting URI for profile media_profile1
RTSP URI: /media/video1
Has Event services: /event/evtservice
Has WSPullPointSupport
RelayOutputs: 0
InputConnectors: 0
Has Device IO services: /onvif/deviceio
AudioOutputs: 0
Done
So, what am I doing wrong. BI is detecting the correct camera, just not displaying the video signal ??
As always, any help would be ever so gratefully received
After a lot of help with @alastairstevenson , I can now get my PC's to see the new camera in a bowser, but still cannot add it to BI --I just get the grey box 'Cam 4 no signal'
However, when I entered the camera ip details & pressed 'find/inspect', Blue Iris reported with :
Opening 192.168.178.34 port 80...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
2011-12-01T00:04:12.000Z
Requesting device information...
Manufacturer: UNIVIEW
Model: IPC3614LR3-PF40-D
FirmwareVersion: IPC_D1202-B0001P75D1705
GetCapabilities...
Querying services
Has Imaging services: /onvif/imaging
Has media services: /onvif/media
Has RTP_RTSP_TCP, requesting profiles
first profile is media_profile1
first source is video_source
requesting URI for profile media_profile1
RTSP URI: /media/video1
Has Event services: /event/evtservice
Has WSPullPointSupport
RelayOutputs: 0
InputConnectors: 0
Has Device IO services: /onvif/deviceio
AudioOutputs: 0
Done
So, what am I doing wrong. BI is detecting the correct camera, just not displaying the video signal ??
As always, any help would be ever so gratefully received