Sun/Rain/Dust Shield for Hikvision mini PTZ - 3D print

dpvue

n3wb
Joined
Dec 27, 2021
Messages
4
Reaction score
3
Location
Ro
I bought a Hikvision DS-2DE3A400BW-DE/W(F1)(S5). According to the tech sheet, the camera is IP66 suitable for outdoor, but the exposed heatsink above is something that I would have not expected from a "pro series" camara. The heatsink is a “magnet” for dust. Also, near the cable there is a gap allowing the water, dust and insects make their way to the mount box and the wires inside.

I've made this 3d print in order to increase the protection, allowing a good ventilation in the same time. It's made for DS-2DE3A400BW-DE/W(F1)(S5), but it should work with other mini PTZ models as well.

Feel free to use it in your personal projects. All thoughts are welcome.


Screenshot 2022-01-19 at 09.32.42.pngScreenshot 2022-01-19 at 09.32.12.pngScreenshot 2022-01-19 at 09.41.45.pngScreenshot 2022-01-19 at 09.54.20.png
 

sebastiantombs

Known around here
Joined
Dec 28, 2019
Messages
11,511
Reaction score
27,690
Location
New Jersey
If a heat sink can't have air circulation it becomes a heat sunk. It's exposed for a reason. Be cautious with clearance with your shield.
 
Top