Tripwire in NVR en niet de camera

[SYSBEN]

Ik heb in China 65x een hdbw1230E-s4 gekocht.
De eerste camera was de hdbw1230E met tripwire aan boord.
de 65 stuks hebben inmiddels een nieuwe versie software waarbij die tripwire eruit is gehaald.
Hoe krijg ik nu die cameras zo gek dat ze wel tripwire ondersteunen?
er wordt geopperd om een NVR aan te schaffen die tripwire ondersteund, maar gaat dat werken als de camera die IVS opties niet heeft.
heb al veel geprobeerd maar krijg dit niet werkend. wil toch graag die 65 cameras met tripwire gaan gebruiken, voor dat doel zijn ze overigens ook gekocht.
Wie oh wie kan hier iets over zeggen?


config - werkende camera


config niet werkende camera

 

[catcamstar]

It might help if you post in English, luckily some people can read and understand Dutch ;-)

Can you show on the "working" camera the following menu entry:

• top right: settings
• left menu: EVENTS
• left menu: Smart Plan: I expect the light bulb to be YELLOW.
• if you then pick the IVS menu item, you'll see your tripwires there.

Following the same logic on your "non-working" camera, I expect that in step 3, the light bulb is not "lit". Activate it, and draw the IVS rules in the IVS menu.

An NVR will only "propagate" its IVS settings towards the 65 cameras (which makes management of these 65 cams bit more easier), otherwise you have to setup each and every cam (eg time zone, video layovers, recording schemes) by hand.

Succes!
CC

 

[SYSBEN]

It might help if you post in English, luckily some people can read and understand Dutch ;-)

Can you show on the "working" camera the following menu entry:

• top right: settings
• left menu: EVENTS
• left menu: Smart Plan: I expect the light bulb to be YELLOW.
• if you then pick the IVS menu item, you'll see your tripwires there.

Following the same logic on your "non-working" camera, I expect that in step 3, the light bulb is not "lit". Activate it, and draw the IVS rules in the IVS menu.

An NVR will only "propagate" its IVS settings towards the 65 cameras (which makes management of these 65 cams bit more easier), otherwise you have to setup each and every cam (eg time zone, video layovers, recording schemes) by hand.

Succes!
CC

Sorry bulb is not there on these Camaras so I can't use tripwire.

 

[catcamstar]

Sorry bulb is not there on these Camaras so I can't use tripwire.

Well, what is your seller stating? Can't he provide you a firmware with IVS features enabled? @EMPIRETECANDY is a respected Dahua seller on this forum, and he has always provided the latest and greatest to all his buyers!

You can try yourself and download firmwares yourself (eg second file on this ftp might be applicable to your systems: Index of /Dahua/kamerove_systemy/Firmware/IPC-HX1X2X )

But you're on your own!

Good luck!
CC

PS. adding an NVR will not "magically" enable IVS on these cams, and more importantly: if your cams are "re-engrished-chinese-cam-scams", your NVR will detect those and ban them from its system. So my first question is important: where did you buy these cams from?