I have DHI-VTH2421F-P Indoor Unit as part of KTP02 IP Video Intercom kit configured as Villa. I could add VTO unit.
I have HIKVISION NVR as well as Tapo C210. The idea I am not able to add both to the monitor.
My network configuration 2 routers main has UPnP and DHCP on, other one is used as a bridge with UPnP on, DHCP off (not hooked to WAN port) (using second router as bridge essentially for better WiFi signal).
Same fail while using DMSS
Notes: All attempts over LAN. NVR and Tapo resolutions set to HD and Full HD respectively. 3rd party IPCams on iPhone managed to detect and add VTO and Tapo camera while I would give a try for NVR on mac but concept is ok and working smoothly. Don’t know what is missing here
I have HIKVISION NVR as well as Tapo C210. The idea I am not able to add both to the monitor.
My network configuration 2 routers main has UPnP and DHCP on, other one is used as a bridge with UPnP on, DHCP off (not hooked to WAN port) (using second router as bridge essentially for better WiFi signal).
Same fail while using DMSS
Notes: All attempts over LAN. NVR and Tapo resolutions set to HD and Full HD respectively. 3rd party IPCams on iPhone managed to detect and add VTO and Tapo camera while I would give a try for NVR on mac but concept is ok and working smoothly. Don’t know what is missing here
Last edited: