Hi guys,
A friend of mine has had his IPC cam working 24h since unboxing. Now, it doesn't work anymore
Camera was reset (microswitch under the hood, pressed 10s with power-on) several times to no avail :
- the camera responds to ping requests, but that's all... and after some time it won't reply unless I power-cycle it.
- port scanners report that only port 22 is open. Web interface on 80 is down as well as all other UDP/TCP/RTSP ports.
- putty won't connect the cam on that port 22
- Dahua configtool won't find the cam
I thought maybe there is a solution to flash its firmware using a micro sd card, but I could not find any information on that.
Any clue, anyone ?
Thanks for any lead.
Yann
A friend of mine has had his IPC cam working 24h since unboxing. Now, it doesn't work anymore
Camera was reset (microswitch under the hood, pressed 10s with power-on) several times to no avail :
- the camera responds to ping requests, but that's all... and after some time it won't reply unless I power-cycle it.
- port scanners report that only port 22 is open. Web interface on 80 is down as well as all other UDP/TCP/RTSP ports.
- putty won't connect the cam on that port 22
- Dahua configtool won't find the cam
I thought maybe there is a solution to flash its firmware using a micro sd card, but I could not find any information on that.
Any clue, anyone ?
Thanks for any lead.
Yann