There appears to be a bug with this NVR and camera combination.
When setting up corridor mode (physically rotating camera 90 degrees and then rotating in the image settings) all motion tracking and VCA detection (line cross and intrusion) stop working.
If I change the rotation back to normal via image settings it starts working again. You can see the green box tracking the moving object and then turns red when triggering a VCA zone. If I change the image rotation back to 90 degrees for corridor mode the green and red boxes no longer appear which isn’t normal.
Anyone experience this before?
Let me know if you need to see video examples.
Dazza
Camera Model IPC3234SR3-DVZ28
Firmware Version IPC_Q1201-B5029P22D1907
Hardware Version B
When setting up corridor mode (physically rotating camera 90 degrees and then rotating in the image settings) all motion tracking and VCA detection (line cross and intrusion) stop working.
If I change the rotation back to normal via image settings it starts working again. You can see the green box tracking the moving object and then turns red when triggering a VCA zone. If I change the image rotation back to 90 degrees for corridor mode the green and red boxes no longer appear which isn’t normal.
Anyone experience this before?
Let me know if you need to see video examples.
Dazza
| NVR Model | NVR302-08E-P8-B |
| Firmware Version | NVR-B3303.29.63.210628 |
| Build Date | 28-06-2021 |
Camera Model IPC3234SR3-DVZ28
Firmware Version IPC_Q1201-B5029P22D1907
Hardware Version B
funny !!!!!,