UNV with Hikvision IP cameras
- Thread starter freddytech
- Start date
Insure ONVIF is enabled in the NVR and in the camera, create an ONVIF username and password in the NVR if such ability exists.
Create a ONVIF username/password in the camera and use those same credentials to get the NVR to detect and add the camera.
Observe the info below found at chapter 4.1.1 in the user manual found here.
4.1.1 IPC Configuration
Note: The third-party cameras cannot be added to the NVR via the private protocol
(ONVIF must be used)
Create a ONVIF username/password in the camera and use those same credentials to get the NVR to detect and add the camera.
Observe the info below found at chapter 4.1.1 in the user manual found here.
4.1.1 IPC Configuration
Add and manage IP cameras.
Go to Menu > Camera > Camera > Camera.Note: The third-party cameras cannot be added to the NVR via the private protocol
(ONVIF must be used)
Last edited: