Very Odd CodeProject.AI/Blue Iris Behavior - Thoughts?

kjinxx2

kjinxx2

Pulling my weight
Dec 1, 2020
166
219
USA
Hi all - running BI 5.9.9.24 (latest stable update) and CodeProject.AI 2.9.5.0

I don't know when/why this started - but BlueIris is randomly receiving TONS of positive identifications on all of my cameras from CodeProject.AI. Below is just an example, this happens on all of my cameras. I've tried reinstalling CPAI, updating BI (this started happening last stable release), etc. I've seen this issue before where multiple models are triggering, but I've configured BI & CPAI to only use one model.

Below is a picture of the alert image & AI Debugger...

Any thoughts on how I can debug this further? Maybe my ipcam model is broken?

1739401247112.png
1739401223782.png

A couple other examples:

1739401293091.png
1739401423553.png
 
Just a long shot, but do you have "static object analysis" checked in the camera AI settings by any chance?
 
Bruce_H said:
Just a long shot, but do you have "static object analysis" checked in the camera AI settings by any chance?
Click to expand...
I do have it enabled on all of my cameras - I just disabled it on one just to see what happens. It does seem like CPAI is shooting off a ton of false positives on single images, though.
 
Let us know how it works. Just wondering, is there a reason you want to identify non moving objects?
 
Unfortunately with it disabled I'm still having the same results!

And, hmm, I was pretty certain that static object analysis was used to cancel alerts for objects that are not moving in the frame. For example, if you have a car parked in your driveway the 'static object analysis' would be used to ensure that AI does not detect the car that is not moving. Maybe I am misunderstanding that feature. Either way the issue is still happening. I am nearly convinced that it is a CPAI issue though and not a BI issue. Though not sure how to proceed in fixing.
 
I just reinstalled CPAI but made sure to delete all models & data - will see if this fixes it. I didn't realize that uninstalling CPAI did not delete the modules/models - will report back.
 
It is also possible that I am mistaken on the purpose of "static object analysis", I have very little movement on most of my cameras as some of them are in the woods well away from any roads!
 
Alright - well the full reinstall seems to have done the trick - I'm guessing some latent model was corrupted but never replaced when I reinstalled... easy fix :banghead:
 
Grrr - I spoke too soon - it is still doing it.. I may try an earlier version of CPAI but I'm at a loss again.
 
You must log in or register to reply here.
Top Bottom