Has anyone had any luck with the Foscam substream settings? I can't get it to work. When I enter anything in the substream box then check the video settings tab, it shows as BI getting the stream from the substream, but with the same resolution as the main stream. This is driving me crazy. It shouldn't be this difficult.
Thanks in advance.
If I change the 0 to a 1 in "Params" in the main stream, I get the feed for the sub stream. The issue is that no mater what I enter in the substream box, I can't get it to work.
Nevermind! I got it to work. For those having issues with Foscam and substream here's what worked for me. Found the answer in this thread
Specifically this comment:
BI5 Camera model is set to the same type other people here have used (See thread
https://blueirissoftware.com/Forum/view ... f=4&t=1488 ). Are there any other types for the R2 ? The answer is yes. There is a rtsp version as well = C1/C2/R2/R4/F198xx/99xx RTSP
When I changed to that, the video main stream changed from "
Main Stream /" to "
Main Stream /videoMain". Looks familiar. I set the substream to "
/videoSub" and it is now working
Before, the params for my Main stream were blank. With the new camera type, it changed to /videoMain so entering videoSub in the substream now works.
I hope this helps someone else.
Thanks for reading