Bricked a DH-NVR5208 - help

davw

Getting the hang of it
Mar 7, 2017
147
30
England
I USB uploaded new firmware on DH-NVR5208 (the one with 1 ethernet only) and it seems to have bricked the NVR
Nothing shows on TV
I am able to ping the IP (192.168.0.54) but thru a browser get "Unable to connect" error message
Via ConfigTool getting a 'Connection Failed'

Any suggestions on how to rescue this.

thank you so much in advance
 
i have bought a usb/serial cable. any advise on best way to use it to rescue NVR.
thank you
 
Hi Dax - not made any progress yet. Need some handholding on what to do. Noticed that when i checked the USB stick multiple "PrintF" files had been added to it. like "printf_20171121234757"
It also reboots every 5 or 10 minutes
cheers
 
When i connected mine to hyperterminal,all the info scrolling through the screen meant nothing to me,but it did give me the option to stop it booting
 
i used a d plug serial cable,and just loaded hyperterminal on to the pc,and it came up on it straight away
 
IMG_20171128_201822.jpg