DDR Training Suc
U-Boot 2010.06-svn (Jun 26 2015 - 15:08:07)
Protected at offset:0,size:40000 Protection status:[0x22f]=>[0x22f].
Hit ctrl+u to stop autoboot: 0
timeout wait for link failed!
yaffs: Mounting /nand
Copy /nand/uImage to 0x42000000... [DONE]
PHY not link!
MAC: 28-57-BE-89-41-B4
TFTP server auto connect disabled
## Booting kernel from Legacy Image at 42000000 ...
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 2.599146] init(1) called reboot syscall, cmd: 0x0.
Thu Jan 1 00:00:02 UTC 1970
Starting udev: [ OK ]
The device has started by warm reboot, ramoops file has been generated in /sys/fs/pstore!
bootpart :0
/usr/bin/hrsaverify: verify "/tmp/start.sh" success!
/usr/bin/hrsaverify: truncate "/tmp/start.sh" to 19344(4b90 hex) success!
Protect Shell (psh)
Enter 'help' for a list of DVR/NVR system commands.
# psh open !!!
----------<1> tar all res ----------
cpu_name :KY2015-1
bootpart :0
decompress sys_app done.
decompress webs done.
release sound files
abnormaltemp.aac
mask.aac
normaltemp.aac
----------<2> show logo ----------
show logo Wed Apr 10 12:12:16 UTC 2024
chmod: /usr/bin/dvrCmd/dvrtools: No such file or directory
Generating 2048 bit rsa key, this may take a while...
chmod: /dev/logo: No such file or directory
----------<3> load hisi sdk ----------
The system mem size is all 1024 os 384 mmz640 9024:0 8200:0 8618:0 8612:0
####################################KY2015-1#######################################
####################################load GPU_KO################################################
0x12120154: 0x00000001 --> 0x00000003
[END]
0x12120154: 0x0000000B --> 0x00000002
[END]
insert gpu
*************************** MASTER HISI LOAD KO START ***************************
************ MASTER MEM_TYPE:1, INS9024:0 INS8200:0 ************
*************************** MASTER::::-i ***************************
*************************** MASTER::::1 ***************************
*************************** MASTER::::0 ***************************
*************************** MASTER::::0 ***************************
*************************** MASTER::::0 ***************************
*************************** MASTER::::0 ***************************
*************** MASTER LOAD HISI SLAVE KO *****************
*************** MASTER LOAD HISI MASTER KO *****************
insert audio
*************************** MASTER HISI LOAD KO END ***************************
/home/app/exec/gpu_ko
��not init hd1 logo��
mv: can't rename '/home/app/lib/*': No such file or directory
plt_vo_setPrtLevel init
load 3536 ok
----------<4> del no use res ----------
----------begain to load net filter modules--------
insmod: can't insert 'nf_conntrack.ko': File exists
insmod nf_conntrack.ko faild[17]!!!
insmod: can't insert 'nf_defrag_ipv4.ko': File exists
insmod nf_defrag_ipv4.ko faild[17]!!!
insmod: can't insert 'nf_conntrack_ipv4.ko': File exists
insmod nf_conntrack_ipv4.ko faild[17]!!!
insmod: can't insert 'nf_nat.ko': File exists
insmod nf_nat.ko faild[17]!!!
insmod: can't insert 'xt_nat.ko': File exists
insmod xt_nat.ko faild[17]!!!
insmod: can't insert 'nf_nat_ipv4.ko': File exists
insmod nf_nat_ipv4.ko faild[17]!!!
insmod: can't insert 'iptable_nat.ko': File exists
insmod iptable_nat.ko faild[17]!!!
insmod: can't insert 'ipt_MASQUERADE.ko': File exists
insmod ipt_MASQUERADE.ko faild[17]!!!
insmod: can't insert 'xt_state.ko': File exists
insmod xt_state.ko faild[17]!!!
insmod: can't insert 'xt_mac.ko': File exists
insmod xt_mac.ko faild[17]!!!
iSCSI daemon with pid=1964 started!iqn name [iqn.2006.04.fineac.28-57-be-89-41-b4.alvin-iscsi-initiator]
!!! set tnk_threshold to 1M Ok !!!
============nothing to do==========
ifconfig: SIOCSIFADDR: No such device
start to start hik_dsp_nofishEye
rm /lib/libOpenCL.so
rm /lib/libmali.so
argc 2 error.
start savelog proc!!!!!
start to start saveLog
GPL main is start
plt_drawChar_setPrtLevel init
setPrtLevel init
plt_vo_setPrtLevel init
plt_ge_setPrtLevel init
plt_aes_setPrtLevel init
plt_rgn_setPrtLevel init
start to start hik_app
start with ezviz 2.x
cp: can't stat '/tmp/saveLog': No such file or directory
[CRIT][hisi_bsp_driver.c #10583][@hisi_get_dev_hard_info]: pdev_hard_info->decodeChans=8
[CRIT][hisi_bsp_driver.c #10585][@hisi_get_dev_hard_info]: pdev_hard_info->ipcChans=8
pdev_hard_info->ataCtrlNums=2
pstruBootParams->Boot.Kmem=384
pstruBootParams->Boot.Emem=640
pstruDevHardInfo->ramSize=1024
hisi_detected_hdmi:0.
[CRIT][pal_api.c #1035][@pal_module_init]: pal_module_init successfully
[CRIT][pal_api.c #130][@pal_add_proc_info][@Th: forget to reg!]: *********undefine fun:pal_add_proc_info*********
[CRIT][sys_guide.c #1402][@read_execl_guide_cfg][@Th: forget to reg!]: start
[CRIT][sys_guide.c #1466][@read_execl_guide_cfg][@Th: forget to reg!]: file /dav2/sys_guid open failed.
read execl guide cfg failed. iRet[-1][CRIT][sbus_util.c #412][@sbus_get_local_addr_from_ifname][@Th: forget to reg!]: get ipaddr from eth1 Done!
[CRIT][sbus_sub_au.c #275][@au_init][@Th: forget to reg!]: get local from netif addr 0x400000c0 192.0.0.64
[CRIT][sbus_main_au.c #368][@fn_sau_accept][@master_accept_svc]: new session hdl [0x88d00468] comming!!
[CRIT][sbus_util.c #603][@uni_hdl_info][@master_accept_svc]: fn_sau_accept hdl: [0x88d00468] fd:[14] type[2] name[/home/app/exec/master]
[CRIT][sbus_util.c #623][@uni_hdl_info][@master_accept_svc]: Net: Local[127.0.0.1:53000]-Remote[127.0.0.1:36906]
[CRIT][union_com_api.c #233][@master_accept_svc][@master_accept_svc]: handle[0x88d00468] fdConn[14] sync client finished.
[CRIT][sbus_sub_au.c #172][@connect_main_au][@Th: forget to reg!]: get szLocalAddr 192.0.0.64
[CRIT][hisi_bsp_driver.c #10583][@hisi_get_dev_hard_info]: pdev_hard_info->decodeChans=8
[CRIT][hisi_bsp_driver.c #10583][@hisi_get_dev_hard_info]: pdev_hard_info->decodeChans=8
[CRIT][hisi_bsp_driver.c #10585][@hisi_get_dev_hard_info]: pdev_hard_info->ipcChans=8
[CRIT][hisi_bsp_driver.c #10585][@hisi_get_dev_hard_info]: pdev_hard_info->ipcChans=8
pdev_hard_info->ataCtrlNums=2
pdev_hard_info->ataCtrlNums=2
pstruBootParams->Boot.Kmem=384
pstruBootParams->Boot.Kmem=384
pstruBootParams->Boot.Emem=640
pstruBootParams->Boot.Emem=640
pstruDevHardInfo->ramSize=1024
pstruDevHardInfo->ramSize=1024
hisi_detected_hdmi:0.
[CRIT][pal_api.c #1035][@pal_module_init]: pal_module_init successfully
[CRIT][pal_api.c #130][@pal_add_proc_info][@Th: forget to reg!]: *********undefine fun:pal_add_proc_info*********
[CRIT][broker_slave.c #2319][@br_slave_init][@Th: forget to reg!]: get local addr 192.0.0.64
[CRIT][sbus_util.c #603][@uni_hdl_info][@master_accept_svc]: fn_accept_session hdl: [0x88b00468] fd:[11] type[1] name[/home/app/exec/master]
[CRIT][sbus_util.c #608][@uni_hdl_info][@master_accept_svc]: Unix: [/var/master]
[CRIT][union_com_api.c #233][@master_accept_svc][@master_accept_svc]: handle[0x88b00468] fdConn[11] sync client finished.
hisi_detected_hdmi:0.
[CRIT][pal_api.c #1035][@pal_module_init]: pal_module_init successfully
[CRIT][pal_api.c #130][@pal_add_proc_info][@Th: forget to reg!]: *********undefine fun:pal_add_proc_info*********
[CRIT][hisi_bsp_driver.c #10583][@hisi_get_dev_hard_info]: pdev_hard_info->decodeChans=8
[CRIT][hisi_bsp_driver.c #10585][@hisi_get_dev_hard_info]: pdev_hard_info->ipcChans=8
pdev_hard_info->ataCtrlNums=2
pstruBootParams->Boot.Kmem=384
pstruBootParams->Boot.Emem=640
pstruDevHardInfo->ramSize=1024
[CRIT][broker_slave.c #2319][@br_slave_init][@Th: forget to reg!]: get local addr 192.0.0.64
[CRIT][sbus_util.c #603][@uni_hdl_info][@master_accept_svc]: fn_accept_session hdl: [0x88b207c8] fd:[23] type[1] name[/home/app/exec/master]
[CRIT][sbus_util.c #608][@uni_hdl_info][@master_accept_svc]: Unix: [/var/master]
[CRIT][union_com_api.c #233][@master_accept_svc][@master_accept_svc]: handle[0x88b207c8] fdConn[23] sync client finished.
t1_api_start
:wait storage [1] and gui[1] and hicore[1] and ipcm[1]
hisi_detected_hdmi:0.
[CRIT][pal_api.c #1035][@pal_module_init]: pal_module_init successfully
[CRIT][pal_api.c #130][@pal_add_proc_info][@Th: forget to reg!]: *********undefine fun:pal_add_proc_info*********
[CRIT][broker_slave.c #2319][@br_slave_init][@Th: forget to reg!]: get local addr 192.0.0.64
[CRIT][sbus_util.c #603][@uni_hdl_info][@master_accept_svc]: fn_accept_session hdl: [0x88a5f008] fd:[24] type[1] name[/home/app/exec/master]
[CRIT][sbus_util.c #608][@uni_hdl_info][@master_accept_svc]: Unix: [/var/master]
[CRIT][union_com_api.c #233][@master_accept_svc][@master_accept_svc]: handle[0x88a5f008] fdConn[24] sync client finished.
[DVR_MAIN_PROCESS]enter dvr_main time[1712751156]
[DVR_MAIN_PROCESS][0][dvr_threadpool_init] start!!,time[1712751156]!!
stack[524288-2097152], poolnum[3]
[DVR_MAIN_PROCESS][0][dvr_threadpool_init] finish,iRet[0]!!,time[1712751156],cost[0]s !!
[DVR_MAIN_PROCESS][1][dvr_startup_system_test_pal] start!!,time[1712751156]!!
[DVR_MAIN_PROCESS][1][dvr_startup_system_test_pal] finish,iRet[0]!!,time[1712751156],cost[0]s !!
[DVR_MAIN_PROCESS][2][dvr_gpl_server_init] start!!,time[1712751156]!!
[DVR_MAIN_PROCESS][2][dvr_gpl_server_init] finish,iRet[0]!!,time[1712751156],cost[0]s !!
[DVR_MAIN_PROCESS][3][dvr_startup_common_res_init] start!!,time[1712751156]!!
GPL server is start
[CRIT][global_error.c #80][@init_global_error_lib][@BR_HICORE_]: /*********************init_global_error_lib*/, init_global_error_lib start!
[DEV_REBOOT_DEVICE][1712751156][sys_check_reboot_task-187]start check reboot!!
[CRIT][global_error.c #94][@init_global_error_lib][@BR_HICORE_]: /*********************init_global_error_lib*/, init_global_error_lib end!
[CRIT][dvr.c #4696][@dvr_startup_common_res_init][@BR_HICORE_]: abi_device_ability_init start!###
[CRIT][hisi_bsp_driver.c #4384][@hisi_iot_abi_init][@BR_HICORE_]: the device does not support iot,the sub functions will not be supported
:0
[CRIT][dvr.c #4698][@dvr_startup_common_res_init][@BR_HICORE_]: abi_device_ability_init end!###
[DVR_MAIN_PROCESS][3][dvr_startup_common_res_init] finish,iRet[0]!!,time[1712751156],cost[0]s !!
[DVR_MAIN_PROCESS][4][dvr_startup_arch_watchdog_init] start!!,time[1712751156]!!
[CRIT][dvr.c #4792][@dvr_startup_arch_watchdog_init][@BR_HICORE_]: watchdog feed time is 25.
[DVR_MAIN_PROCESS][4][dvr_startup_arch_watchdog_init] finish,iRet[0]!!,time[1712751156],cost[0]s !!
[DVR_MAIN_PROCESS][5][dvr_startup_etherif_init] start!!,time[1712751156]!!
[CRIT][sc_gui.c #2263][@gui_api_start][@BR_GUI_]: ~~~~~~~gui_api_start START~~~~~~~
:0
[DVR_MAIN_PROCESS][5][dvr_startup_etherif_init] finish,iRet[0]!!,time[1712751156],cost[0]s !!
[DVR_MAIN_PROCESS][6][dvr_startup_loading_smartChip_init] start!!,time[1712751156]!!
[DVR_MAIN_PROCESS][6][dvr_startup_loading_smartChip_init] finish,iRet[0]!!,time[1712751156],cost[0]s !!
[DVR_MAIN_PROCESS][7][fan_control_start] start!!,time[1712751156]!!
[DVR_MAIN_PROCESS][7][fan_control_start] finish,iRet[0]!!,time[1712751156],cost[0]s !!
[DVR_MAIN_PROCESS][8][dvr_startup_check_*] start!!,time[1712751156]!!
[DVR_MAIN_PROCESS][8][dvr_startup_check_*] finish,iRet[0]!!,time[1712751156],cost[0]s !!
[DVR_MAIN_PROCESS][9][dvr_startup_fips_init] start!!,time[1712751156]!!
[CRIT][hisi_bsp.c #9775][@hisi_start_loading_smartChip_task][@Th: forget to reg!]: dont need hisi_start_loading_smartChip_task, exit!!
[CRIT][dvr.c #3932][@sys_init_check_md5][@Th: forget to reg!]: szUpgDirPath[/dav0/]
[DVR_MAIN_PROCESS][9][dvr_startup_fips_init] finish,iRet[0]!!,time[1712751157],cost[1]s !!
[DVR_MAIN_PROCESS][10][pal_init_version_bin_file] start!!,time[1712751157]!!
[CRIT][pal_api.c #249][@pal_init_version_bin_file][@BR_HICORE_]: *********undefine fun:pal_init_version_bin_file*********
[DVR_MAIN_PROCESS][10][pal_init_version_bin_file] finish,iRet[201]!!,time[1712751157],cost[0]s !!
[DVR_MAIN_PROCESS][11][dvr_startup_poe_etherif_init] start!!,time[1712751157]!!
[DVR_MAIN_PROCESS][11][dvr_startup_poe_etherif_init] finish,iRet[0]!!,time[1712751157],cost[0]s !!
[DVR_MAIN_PROCESS][12][security_key_work_init] start!!,time[1712751157]!!
[DVR_MAIN_PROCESS][12][security_key_work_init] finish,iRet[0]!!,time[1712751157],cost[0]s !!
[DVR_MAIN_PROCESS][13][dvr_startup_encode_chan_num_init] start!!,time[1712751157]!!
[DVR_MAIN_PROCESS][13][dvr_startup_encode_chan_num_init] finish,iRet[0]!!,time[1712751157],cost[0]s !!
[DVR_MAIN_PROCESS][14][dvr_startup_chan_osd_init] start!!,time[1712751157]!!
[DVR_MAIN_PROCESS][14][dvr_startup_chan_osd_init] finish,iRet[0]!!,time[1712751157],cost[0]s !!
[DVR_MAIN_PROCESS][15][cfg_module_param_init] start!!,time[1712751157]!!
init_lzma_mem alloc size 1048576
[CRIT][cfg_ctrl.c #173][@check_cfg_is_410menu][@BR_HICORE_]: == check_cfg_is_410menu == fs can't check,return!!
[CRIT][cfg_param_init.c #327][@cfg_blocks_init_devcfg][@BR_HICORE_]: pal_get_file_path PAL_FILE_CFG_FLASH_PATH error!
[CRIT][cfg_param_init.c #337][@cfg_blocks_init_devcfg][@BR_HICORE_]: get cfg path failed
cfg_data_block_register successfullysysDevSpare.cfg cfg_data_block_register successfully
file:src/net/cfg_net_init.c,line:5376, info: register cfgNetIf success
file:src/net/cfg_net_init.c,line:5394, info: register cfgNetSrv success
file:src/net/cfg_net_init.c,line:5418, info: register cfgNetNui success
file:src/pi/cfg_pi_init.c,line:569, info: register cfgPiIf success
regist tiPos successful
[CRIT][cfg_param_init.c #357][@cfg_blocks_init_devcfg][@BR_HICORE_]: dev_cfg.bin or dev_cfg.lzma exsit,return!
[CRIT][cfg_param_init.c #426][@cfg_blocks_init_devcfg][@BR_HICORE_]: cfg_blocks_init_devcfg successfully!
[CRIT][patch_get_old_cfg.c #16934][@patch_read_dev_param_from_old_cfg][@BR_HICORE_]: bFsInFlash[1] bHisi3535OldCfg[0] abi_sup_cfg_file_backup() is [1]
[CRIT][patch_get_old_cfg.c #17332][@patch_read_dev_param_from_old_cfg][@BR_HICORE_]: flash have fileSystem
[CRIT][patch_get_old_cfg.c #16093][@para_read_param_from_device][@BR_HICORE_]: Can't open parameter file on flash, errno=0x2 pCfgFileName=/dav2/devCfg.bin.
[CRIT][patch_get_old_cfg.c #17369][@patch_read_dev_param_from_old_cfg][@BR_HICORE_]: 1:readDevParam /dav2/devCfg.bin error
[CRIT][patch_get_old_cfg.c #16093][@para_read_param_from_device][@BR_HICORE_]: Can't open parameter file on flash, errno=0x2 pCfgFileName=/dav2/devCfg_backup.bin.
[CRIT][patch_get_old_cfg.c #17372][@patch_read_dev_param_from_old_cfg][@BR_HICORE_]: 1:readDevParam /dav2/devCfg_backup.bin error
[CRIT][cs_cfg_ctrl.c #145][@cfg_load_all_blocks][@BR_HICORE_]: cfg is xml type
<<<<<<<=====LN:420,FN:prev_get_value_from_block,uiVersion=0x220407=============>>>>>>
<<<<<<<=====LN:518,FN:user_get_value_from_block,uiVersion=2229255=============>>>>>>
~~get_hard_devinfo(lang=1)~~~
~~~default_value(lang=1)~~~
<<<<<<<=====LN:485,FN:sys_get_value_from_block,uiVersion=2229255=============>>>>>>
[ 52.842298] libphy: STMMAC FIXED MII:01 - Link is Up - 1000/Full
[CRIT][sc_hddcare_api.c #162][@hddcare_api_start][@BR_HDDCARE_]: hddcare wait sc_storage[2] sc_hicore[2] iRetryTimes[20]
[CRIT][dvr.c #3957][@sys_init_check_md5][@Th: forget to reg!]: upgrade file is correct, the device can start
:wait storage [2] and gui[2] and hicore[2] and ipcm[0]
[CRIT][sc_hddcare_api.c #162][@hddcare_api_start][@BR_HDDCARE_]: hddcare wait sc_storage[2] sc_hicore[2] iRetryTimes[30]
[CRIT][sc_hddcare_api.c #162][@hddcare_api_start][@BR_HDDCARE_]: hddcare wait sc_storage[2] sc_hicore[2] iRetryTimes[40]
:wait storage [2] and gui[2] and hicore[2] and ipcm[0]
<<<<<<<=====LN:3223,FN:alarm_base_get_value_from_block,uiVersion=2229255=============>>>>>>
[CRIT][sc_hddcare_api.c #162][@hddcare_api_start][@BR_HDDCARE_]: hddcare wait sc_storage[2] sc_hicore[2] iRetryTimes[50]
:wait storage [2] and gui[2] and hicore[2] and ipcm[0]
[CRIT][sc_hddcare_api.c #162][@hddcare_api_start][@BR_HDDCARE_]: hddcare wait sc_storage[2] sc_hicore[2] iRetryTimes[60]
cfg_net_set_ezviz_srv_default_value start enable_shipin7_time:0
[CRIT][sc_hddcare_api.c #162][@hddcare_api_start][@BR_HDDCARE_]: hddcare wait sc_storage[2] sc_hicore[2] iRetryTimes[70]
eh_cfg_get_value_from_block uiVersion:0x220407
tiPos_set_default_value
########cfg_patch_reserve_cfg out!##############
[CRIT][cs_cfg_ctrl.c #149][@cfg_load_all_blocks][@BR_HICORE_]: cfg load all blocks ok
ioctl error:0x11(File exists)
file:src/pi/cfg_pi_init.c,line:444 error: pal_rs232_init error
>>>>>>>>>>>>>>>>>>> eh_if_init_cfg g_struIfRegisterPara.u8bEnable:50 g_struIfRegisterPara.u8ProtocolVersion:0
[DVR_MAIN_PROCESS][15][cfg_module_param_init] finish,iRet[0]!!,time[1712751192],cost[35]s !!
[DVR_MAIN_PROCESS][16][voice_broadcast_voices_loading_init] start!!,time[1712751192]!!
[DVR_MAIN_PROCESS][16][voice_broadcast_voices_loading_init] finish,iRet[0]!!,time[1712751192],cost[0]s !!
[DVR_MAIN_PROCESS][17][dvr_startup_set_big_resolution_mode] start!!,time[1712751192]!!
[DVR_MAIN_PROCESS][17][dvr_startup_set_big_resolution_mode] finish,iRet[0]!!,time[1712751192],cost[0]s !!
[DVR_MAIN_PROCESS][18][dvr_startup_toe_init] start!!,time[1712751192]!!
[DVR_MAIN_PROCESS][18][dvr_startup_toe_init] finish,iRet[0]!!,time[1712751192],cost[0]s !!
[DVR_MAIN_PROCESS][19][dvr_startup_set_psh_passwd] start!!,time[1712751192]!!
[CRIT][dvr.c #5310][@dvr_startup_set_psh_passwd][@BR_HICORE_]: bDeviceActive[1]!!
[DVR_MAIN_PROCESS][19][dvr_startup_set_psh_passwd] finish,iRet[0]!!,time[1712751192],cost[0]s !!
[DVR_MAIN_PROCESS][20][dvr_startup_net_if_init] start!!,time[1712751192]!!
===iCnt[1]===
=================net_if_set_mtu iRet:[0]
input param is:1-0-0-eth1
accept ok, server socket=8!
=========start dhcp!
=net_if_clear_ipv6_info=if[eth1]=index[0]=
=net_if_clear_ipv6_info=if[eth1]=index[0]=iRet[0]=
=set dns=pri[]=sec[]===
[DVR_MAIN_PROCESS][20][dvr_startup_net_if_init] finish,iRet[0]!!,time[1712751192],cost[0]s !!
[DVR_MAIN_PROCESS][21][dvr_startup_adjust_reso_param] start!!,time[1712751192]!!
[DVR_MAIN_PROCESS][21][dvr_startup_adjust_reso_param] finish,iRet[0]!!,time[1712751192],cost[0]s !!
[DVR_MAIN_PROCESS][22][dvr_startup_adjust_raid_ability] start!!,time[1712751192]!!
[DVR_MAIN_PROCESS][22][dvr_startup_adjust_raid_ability] finish,iRet[0]!!,time[1712751192],cost[0]s !!
[DVR_MAIN_PROCESS][23][sys_manage_filefd_init] start!!,time[1712751192]!!
INFO : sys_manage_filefd_init() :10197:sys_manage_filefd_init OK!
[DVR_MAIN_PROCESS][23][sys_manage_filefd_init] finish,iRet[0]!!,time[1712751192],cost[0]s !!
[DVR_MAIN_PROCESS][24][dvr_startup_set_upg_partition_protect] start!!,time[1712751192]!!
set net mask ioctl error:: Cannot assign requested address
[CRIT][dvr.c #5339][@dvr_startup_set_upg_partition_protect][@BR_HICORE_]: abi_sup_upg_partition_protect not support!!
[DVR_MAIN_PROCESS][24][dvr_startup_set_upg_partition_protect] finish,iRet[0]!!,time[1712751192],cost[0]s !!
[DVR_MAIN_PROCESS][25][sys_update_shadow] start!!,time[1712751192]!!
[DVR_MAIN_PROCESS][25][sys_update_shadow] finish,iRet[0]!!,time[1712751192],cost[0]s !!
[DVR_MAIN_PROCESS][26][init_sps_pps_res] start!!,time[1712751192]!!
[DVR_MAIN_PROCESS][26][init_sps_pps_res] finish,iRet[0]!!,time[1712751192],cost[0]s !!
[DVR_MAIN_PROCESS][27][dvr_startup_mega_baseline_init] start!!,time[1712751192]!!
<MEGA_DSP>Def Value:
<MEGA_DSP>Main mux type [0x10][0x2].
<MEGA_DSP>Sub mux type [0x10][0x2].
<MEGA_DSP>audio enc type[0x1011][0x1].
<MEGA_DSP>voicetalk type[0x1011][0x1].
<MEGA_DSP>Need PS SysHdr[0].
iVideoEncType : 2
iAudioEncType : 4113
iVTType : 4113
iMainMuxType : 16
iSubMuxType : 16
iMainPackLen : 1376
iSubPackLen : 1376
bNeedPSSysHdr : FALSE
bNeedSubQVGARes : FALSE
bMegaPlatEnable : FALSE
[DVR_MAIN_PROCESS][27][dvr_startup_mega_baseline_init] finish,iRet[0]!!,time[1712751192],cost[0]s !!
[DVR_MAIN_PROCESS][28][dvr_startup_alarm_count_res_init] start!!,time[1712751192]!!
[DVR_MAIN_PROCESS][28][dvr_startup_alarm_count_res_init] finish,iRet[0]!!,time[1712751192],cost[0]s !!
[DVR_MAIN_PROCESS][29][dvr_startup_dsp_init] start!!,time[1712751192]!!
=========start zerocfg!
if get cvbs_open[0]
Init: App send ramSize 1024 to Dsp
InitDsp in encChanCnt = 0, decChanCnt = 8, IpcChanCnt = 8, max_decode_ability=8
app init dsp
app_lib_initPrint ok!
:wait storage [2] and gui[2] and hicore[2] and ipcm[0]
[CRIT][sc_hddcare_api.c #162][@hddcare_api_start][@BR_HDDCARE_]: hddcare wait sc_storage[2] sc_hicore[2] iRetryTimes[80]
call logc_init
2024-04-10 12:13:20.530 [2282057728] ERROR dsp_ai - <ai_plt_venc.c>|<ai_plt_venc_init>|<70>, ai_plt_venc_init not proc
<DSP_ASS> SYS_VCA [dsp_vca_stream_init:588] pInitParam->chipCnt:0
InitDsp out encChanCnt = 0, decChanCnt = 8, IpcChanCnt = 8, startMagic = 1212894560
init_ai_lib in sizeof(DSPINITPARA) = 0x494004 | 4800516
init_ai_lib out encChanCnt = 0, decChanCnt = 8, IpcChanCnt = 8
---------------------------- DSP BUF info struLen:4800516 -------------------------
g_pstruDspInitPara->device_type=0xa621
g_pstruDspInitPara->macAddr 0x:
0x28
0x57
0xbe
0x89
0x41
0xb4
----------------------------DEC BUF info -------------------------
play dec chan[0] VirAddr:0x0x87881000, PhyAddr:0x(nil), len=0x80000
play trans chan[0] VirAddr:0x0x7fbe4000, PhyAddr:0x(nil), len=0x100000n
play dec chan[1] VirAddr:0x0x877e1000, PhyAddr:0x(nil), len=0x80000
play trans chan[1] VirAddr:0x0x7fae4000, PhyAddr:0x(nil), len=0x100000n
play dec chan[2] VirAddr:0x0x87741000, PhyAddr:0x(nil), len=0x80000
play trans chan[2] VirAddr:0x0x7f9e4000, PhyAddr:0x(nil), len=0x100000n
play dec chan[3] VirAddr:0x0x86cc8000, PhyAddr:0x(nil), len=0x80000
play trans chan[3] VirAddr:0x0x7f8e4000, PhyAddr:0x(nil), len=0x100000n
play dec chan[4] VirAddr:0x0x86c28000, PhyAddr:0x(nil), len=0x80000
play trans chan[4] VirAddr:0x0x7f7e4000, PhyAddr:0x(nil), len=0x100000n
play dec chan[5] VirAddr:0x0x86b88000, PhyAddr:0x(nil), len=0x80000
play trans chan[5] VirAddr:0x0x7f6e4000, PhyAddr:0x(nil), len=0x100000n
play dec chan[6] VirAddr:0x0x86ae8000, PhyAddr:0x(nil), len=0x80000
play trans chan[6] VirAddr:0x0x7f5e4000, PhyAddr:0x(nil), len=0x100000n
play dec chan[7] VirAddr:0x0x86a48000, PhyAddr:0x(nil), len=0x80000
play trans chan[7] VirAddr:0x0x7f4e4000, PhyAddr:0x(nil), len=0x100000n----------------------------DOWN STRAM BUF info -------------------
ipc dec[8] VirtAddr:0x0x86938000, PhyAddr:0x(nil), len:0x100000 dec[16] VirtAddr:0x0x85f34000, PhyAddr:0x(nil), len:0x80000
ipc dec[9] VirtAddr:0x0x86624000, PhyAddr:0x(nil), len:0x100000 dec[17] VirtAddr:0x0x85ea4000, PhyAddr:0x(nil), len:0x80000
ipc dec[10] VirtAddr:0x0x86514000, PhyAddr:0x(nil), len:0x100000 dec[18] VirtAddr:0x0x85e14000, PhyAddr:0x(nil), len:0x80000
ipc dec[11] VirtAddr:0x0x86404000, PhyAddr:0x(nil), len:0x100000 dec[19] VirtAddr:0x0x85d84000, PhyAddr:0x(nil), len:0x80000
ipc dec[12] VirtAddr:0x0x862f4000, PhyAddr:0x(nil), len:0x100000 dec[20] VirtAddr:0x0x85cf4000, PhyAddr:0x(nil), len:0x80000
ipc dec[13] VirtAddr:0x0x861e4000, PhyAddr:0x(nil), len:0x100000 dec[21] VirtAddr:0x0x85c64000, PhyAddr:0x(nil), len:0x80000
ipc dec[14] VirtAddr:0x0x860d4000, PhyAddr:0x(nil), len:0x100000 dec[22] VirtAddr:0x0x85bd4000, PhyAddr:0x(nil), len:0x80000
ipc dec[15] VirtAddr:0x0x85fc4000, PhyAddr:0x(nil), len:0x100000 dec[23] VirtAddr:0x0x85b44000, PhyAddr:0x(nil), len:0x80000
----------------------------SECRET IN STRAM BUF info -------------------
dec[25] VirtAddr:0x(nil), PhyAddr:0x(nil), len:0x0, dec[26] VirtAddr:0x(nil), PhyAddr:0x(nil), len:0x0
----------------------------REC NET TRANS BUF info ----------------
ipc rec stream [0] vAddr = 0x0x85264000, pAddr = 0x(nil), len = 0x400000
ipc net main stream[0] vAddr = 0x0x85064000, pAddr = 0x(nil), len = 0x200000
ipc net sub stream [0] vAddr = 0x0x84fe4000, pAddr = 0x(nil), len = 0x80000
ipc trans [0] vAddr = 0x0x80064000, pAddr = 0x(nil), len = 0x80000
ipc rec stream [1] vAddr = 0x0x84bc4000, pAddr = 0x(nil), len = 0x400000
ipc net main stream[1] vAddr = 0x0x849c4000, pAddr = 0x(nil), len = 0x200000
ipc net sub stream [1] vAddr = 0x0x84944000, pAddr = 0x(nil), len = 0x80000
ipc trans [1] vAddr = 0x0x7ffe4000, pAddr = 0x(nil), len = 0x80000
ipc rec stream [2] vAddr = 0x0x84524000, pAddr = 0x(nil), len = 0x400000
ipc net main stream[2] vAddr = 0x0x84324000, pAddr = 0x(nil), len = 0x200000
ipc net sub stream [2] vAddr = 0x0x842a4000, pAddr = 0x(nil), len = 0x80000
ipc trans [2] vAddr = 0x0x7ff64000, pAddr = 0x(nil), len = 0x80000
ipc rec stream [3] vAddr = 0x0x83e84000, pAddr = 0x(nil), len = 0x400000
ipc net main stream[3] vAddr = 0x0x83c84000, pAddr = 0x(nil), len = 0x200000
ipc net sub stream [3] vAddr = 0x0x83c04000, pAddr = 0x(nil), len = 0x80000
ipc trans [3] vAddr = 0x0x7fee4000, pAddr = 0x(nil), len = 0x80000
ipc rec stream [4] vAddr = 0x0x837e4000, pAddr = 0x(nil), len = 0x400000
ipc net main stream[4] vAddr = 0x0x835e4000, pAddr = 0x(nil), len = 0x200000
ipc net sub stream [4] vAddr = 0x0x83564000, pAddr = 0x(nil), len = 0x80000
ipc trans [4] vAddr = 0x0x7fe64000, pAddr = 0x(nil), len = 0x80000
ipc rec stream [5] vAddr = 0x0x83144000, pAddr = 0x(nil), len = 0x400000
ipc net main stream[5] vAddr = 0x0x82f44000, pAddr = 0x(nil), len = 0x200000
ipc net sub stream [5] vAddr = 0x0x82ec4000, pAddr = 0x(nil), len = 0x80000
ipc trans [5] vAddr = 0x0x7fde4000, pAddr = 0x(nil), len = 0x80000
ipc rec stream [6] vAddr = 0x0x82aa4000, pAddr = 0x(nil), len = 0x400000
ipc net main stream[6] vAddr = 0x0x828a4000, pAddr = 0x(nil), len = 0x200000
ipc net sub stream [6] vAddr = 0x0x82824000, pAddr = 0x(nil), len = 0x80000
ipc trans [6] vAddr = 0x0x7fd64000, pAddr = 0x(nil), len = 0x80000
ipc rec stream [7] vAddr = 0x0x82404000, pAddr = 0x(nil), len = 0x400000
ipc net main stream[7] vAddr = 0x0x82204000, pAddr = 0x(nil), len = 0x200000
ipc net sub stream [7] vAddr = 0x0x82184000, pAddr = 0x(nil), len = 0x80000
ipc trans [7] vAddr = 0x0x7fce4000, pAddr = 0x(nil), len = 0x80000
----------------------------SECRET OUT STRAM BUF info -------------------
ipc rec stream [8] vAddr = 0x0x81f84000, pAddr = 0x(nil), len = 0x200000
----------------------------ZERO DEC BUF info ----------------
************g_pstruDspInitPara[0x86d68000], VirAddr:0x85684000, PhyAddr:0x0, len:0x400000
ZeroNet MainNetAddr[phy:0x0, vir:0x80704000, Len:0x80000], SubNetAddr[phy:0x0, vir:0x0, Len:0x0]
************g_pstruDspInitPara[0x86d68000], menuShareBuf 0[0x86d68104, pAddr=0x5d000000, vAddr=0x7f0aa000, w:1920,h1080,p:3840] 1[0x86d6811c, pAddr=0x5d000000, vAddr=0x7f0aa000, w:1920,h1080,p:3840],
----------------------------Stream Share Buf info ----------------
Stream Share Buf Addr[phy:0x73e33000, vir:0x803f4000, Len:0x310000]
g_pstruDspInitPara->sn=553982379
g_pstruDspInitPara->viType = 38
^_^ Chip Id Is Ok ^_^
remove HISI_HZK16_FONT_PATH fail
!!!!!!!!!!!!!!!!!!!!!!!!!DSP Init Ok!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[DVR_MAIN_PROCESS][29][dvr_startup_dsp_init] finish,iRet[0]!!,time[1712751200],cost[8]s !!
[DVR_MAIN_PROCESS][30][dvr_startup_adjust_prev_ability] start!!,time[1712751200]!!
[DVR_MAIN_PROCESS][30][dvr_startup_adjust_prev_ability] finish,iRet[0]!!,time[1712751200],cost[0]s !!
[DVR_MAIN_PROCESS][31][dvr_startup_hdmi_self_adaption] start!!,time[1712751200]!!
[DVR_MAIN_PROCESS][31][dvr_startup_hdmi_self_adaption] finish,iRet[0]!!,time[1712751200],cost[0]s !!
[DVR_MAIN_PROCESS][32][dvr_startup_time_set] start!!,time[1712751200]!!
[CRIT][timerApp.c #504][@adjustSysDateFromRTC][@BR_HICORE_]: cur utc Time start 1712751200, bCheck[0]
[CRIT][timerApp.c #536][@adjustSysDateFromRTC][@BR_HICORE_]: RTC time finish 1712754801
[DVR_MAIN_PROCESS][32][dvr_startup_time_set] finish,iRet[-1]!!,time[1712754801],cost[3601]s !!
[DVR_MAIN_PROCESS][33][sc_sadp_set_sys_info] start!!,time[1712754801]!!
sc_net_if_get_ipv4_addr ip 0 mask 0
sc_net_if_get_ipv4_addr ip 0 mask 0
[CRIT][sc_hddcare_api.c #162][@hddcare_api_start][@BR_HDDCARE_]: hddcare wait sc_storage[2] sc_hicore[2] iRetryTimes[90]
sc_net_if_get_ipv4_addr ip 0 mask 0
sc_net_if_get_ipv4_addr ip 0 mask 0
sc_net_if_get_ipv4_addr ip 0 mask 0
sc_net_if_get_ipv4_addr ip 0 mask 0
sc_net_if_get_ipv4_addr ip 0 mask 0
sc_net_if_get_ipv4_addr ip 0 mask 0
sc_net_if_get_ipv4_addr ip 0 mask 0
sc_net_if_get_ipv4_addr ip 0 mask 0
sc_net_if_get_ipv4_addr ip 0 mask 0
sc_net_if_get_ipv4_addr ip 0 mask 0
:wait storage [2] and gui[2] and hicore[2] and ipcm[0]
[DVR_MAIN_PROCESS][33][sc_sadp_set_sys_info] finish,iRet[-1]!!,time[1712754803],cost[2]s !!
[DVR_MAIN_PROCESS][34][dvr_startup_rs485_sem_init] start!!,time[1712754803]!!
[DVR_MAIN_PROCESS][34][dvr_startup_rs485_sem_init] finish,iRet[0]!!,time[1712754803],cost[0]s !!
[DVR_MAIN_PROCESS][35][dvr_startup_ptzcoaxial_sem_init] start!!,time[1712754803]!!
[DVR_MAIN_PROCESS][35][dvr_startup_ptzcoaxial_sem_init] finish,iRet[0]!!,time[1712754803],cost[0]s !!
[DVR_MAIN_PROCESS][36][initPlayDspDecResCtrl] start!!,time[1712754803]!!
[DVR_MAIN_PROCESS][36][initPlayDspDecResCtrl] finish,iRet[0]!!,time[1712754803],cost[0]s !!
[DVR_MAIN_PROCESS][37][dvr_startup_user_security_init] start!!,time[1712754803]!!
[DVR_MAIN_PROCESS][37][dvr_startup_user_security_init] finish,iRet[0]!!,time[1712754803],cost[0]s !!
[DVR_MAIN_PROCESS][38][pic_module_init] start!!,time[1712754803]!!
[DVR_MAIN_PROCESS][38][pic_module_init] finish,iRet[0]!!,time[1712754803],cost[0]s !!
[DVR_MAIN_PROCESS][39][init_cap_pic_buf] start!!,time[1712754803]!!
start init_cap_pic_buf!!!
init cap pic buf success!!![0x7ea139c8],size[65536]
[DVR_MAIN_PROCESS][39][init_cap_pic_buf] finish,iRet[0]!!,time[1712754803],cost[0]s !!
[DVR_MAIN_PROCESS][40][dvr_startup_ipc_set_chan_map] start!!,time[1712754803]!!
[DVR_MAIN_PROCESS][40][dvr_startup_ipc_set_chan_map] finish,iRet[0]!!,time[1712754803],cost[0]s !!
[DVR_MAIN_PROCESS][41][prev_module_res_init] start!!,time[1712754803]!!
prev_start_prev debugdebug!!!!!!!!!!!!!!!!!!
[DVR_MAIN_PROCESS][41][prev_module_res_init] finish,iRet[0]!!,time[1712754803],cost[0]s !!
[DVR_MAIN_PROCESS][42][dvr_startup_backup_res_init] start!!,time[1712754803]!!
PBRes init at MianVochan 4
[DVR_MAIN_PROCESS][42][dvr_startup_backup_res_init] finish,iRet[0]!!,time[1712754803],cost[0]s !!
[DVR_MAIN_PROCESS][43][dvr_startup_ipc_res_init] start!!,time[1712754803]!!
[DVR_MAIN_PROCESS][43][dvr_startup_ipc_res_init] finish,iRet[0]!!,time[1712754803],cost[0]s !!
[DVR_MAIN_PROCESS][44][play_init_compent] start!!,time[1712754803]!!
[play_set_search_param][+++]
[play_set_search_param][---]
[play_set_search_param][+++]
[play_set_search_param][---]
[play_set_search_param][+++]
[play_set_search_param][---]
[play_set_search_param][+++]
[play_set_search_param][---]
[play_set_search_param][+++]
[play_set_search_param][---]
[play_set_search_param][+++]
[play_set_search_param][---]
[play_set_search_param][+++]
[play_set_search_param][---]
[play_set_search_param][+++]
[play_set_search_param][---]
[play_set_search_param][+++]
[play_set_search_param][---]
[play_set_search_param][+++]
[play_set_search_param][---]
[play_set_search_param][+++]
[play_set_search_param][---]
[play_set_search_param][+++]
[play_set_search_param][---]
[play_set_search_param][+++]
[play_set_search_param][---]
[play_set_search_param][+++]
[play_set_search_param][---]
[play_set_search_param][+++]
[play_set_search_param][---]
[play_set_search_param][+++]
[play_set_search_param][---]
[DVR_MAIN_PROCESS][44][play_init_compent] finish,iRet[0]!!,time[1712754803],cost[0]s !!
[DVR_MAIN_PROCESS][45][dvr_startup_streambuf_init] start!!,time[1712754803]!!
[CRIT][dvr.c #5654][@dvr_startup_streambuf_init][@BR_HICORE_]: ucSupAlarmPic[1], ucNoSupVcaAlarm[0]
[DVR_MAIN_PROCESS][45][dvr_startup_streambuf_init] finish,iRet[0]!!,time[1712754803],cost[0]s !!
[DVR_MAIN_PROCESS][46][dvr_startup_ptzlib_init] start!!,time[1712754803]!!
[DVR_MAIN_PROCESS][46][dvr_startup_ptzlib_init] finish,iRet[0]!!,time[1712754803],cost[0]s !!
[DVR_MAIN_PROCESS][47][dvr_startup_main_sc] start!!,time[1712754803]!!
[DVR_MAIN_SC_PROCESS]enter dvr_main_sc time[1712754803]
[DVR_MAIN_PROCESS][47][dvr_startup_main_sc] finish,iRet[0]!!,time[1712754803],cost[0]s !!
[DVR_MAIN_PROCESS][48][dvr_check_kvm_status_task] start!!,time[1712754803]!!
[DVR_MAIN_PROCESS][48][dvr_check_kvm_status_task] finish,iRet[0]!!,time[1712754803],cost[0]s !!
[DVR_MAIN_PROCESS][49][dvr_startup_net_add_virtual_host_v1] start!!,time[1712754803]!!
[DVR_MAIN_SC_PROCESS][0][dvr_startup_sc_wait_sc_status] start!!,time[1712754803]!!
[DVR_MAIN_PROCESS][49][dvr_startup_net_add_virtual_host_v1] finish,iRet[0]!!,time[1712754803],cost[0]s !!
[DVR_MAIN_PROCESS][50][dvr_startup_handle_pppoe_cfg] start!!,time[1712754803]!!
wait storage [2] and gui[2]
[DVR_MAIN_PROCESS][50][dvr_startup_handle_pppoe_cfg] finish,iRet[0]!!,time[1712754803],cost[0]s !!
[DVR_MAIN_PROCESS][51][dvr_startup_psh_start] start!!,time[1712754803]!!
[DVR_MAIN_PROCESS][51][dvr_startup_psh_start] finish,iRet[0]!!,time[1712754803],cost[0]s !!
[DVR_MAIN_PROCESS][52][dvr_startup_rs232_init] start!!,time[1712754803]!!
=== cfgpiIf.cfg=bLoaded[0]=time[1712754803]=iCount = 0 dvr_startup_rs232_init 5128]
remove pppoed!
[main:637]-->==================enablePPPoE failed!!!
wait storage [2] and gui[2]
=== cfgpiIf.cfg=bLoaded[0]=time[1712754804]=iCount = 1 dvr_startup_rs232_init 5128]
wait storage [2] and gui[2]
=== cfgpiIf.cfg=bLoaded[0]=time[1712754805]=iCount = 2 dvr_startup_rs232_init 5128]
[CRIT][sc_hddcare_api.c #162][@hddcare_api_start][@BR_HDDCARE_]: hddcare wait sc_storage[2] sc_hicore[2] iRetryTimes[100]
=== cfgpiIf.cfg=bLoaded[0]=time[1712754806]=iCount = 3 dvr_startup_rs232_init 5128]
wait storage [2] and gui[2]
=== cfgpiIf.cfg=bLoaded[0]=time[1712754807]=iCount = 4 dvr_startup_rs232_init 5128]
wait storage [2] and gui[2]
=== cfgpiIf.cfg=bLoaded[0]=time[1712754808]=iCount = 5 dvr_startup_rs232_init 5128]
wait storage [2] and gui[2]
=== cfgpiIf.cfg=bLoaded[0]=time[1712754809]=iCount = 6 dvr_startup_rs232_init 5128]
wait storage [2] and gui[2]
=== cfgpiIf.cfg=bLoaded[0]=time[1712754811]=iCount = 7 dvr_startup_rs232_init 5128]
wait storage [2] and gui[2]
=== cfgpiIf.cfg=bLoaded[0]=time[1712754812]=iCount = 8 dvr_startup_rs232_init 5128]
[CRIT][sc_hddcare_api.c #162][@hddcare_api_start][@BR_HDDCARE_]: hddcare wait sc_storage[2] sc_hicore[2] iRetryTimes[110]
:wait storage [2] and gui[2] and hicore[2] and ipcm[0]
wait storage [2] and gui[2]
=== cfgpiIf.cfg=bLoaded[0]=time[1712754813]=iCount = 9 dvr_startup_rs232_init 5128]
=== cfgpiIf.cfg=bLoaded[0]=time[1712754814]=iCount = 10 dvr_startup_rs232_init 5128]
wait storage [2] and gui[2]
=== cfgpiIf.cfg=bLoaded[0]=time[1712754815]=iCount = 11 dvr_startup_rs232_init 5128]
wait storage [2] and gui[2]
=== cfgpiIf.cfg=bLoaded[0]=time[1712754816]=iCount = 12 dvr_startup_rs232_init 5128]
wait storage [2] and gui[2]
=== cfgpiIf.cfg=bLoaded[0]=time[1712754817]=iCount = 13 dvr_startup_rs232_init 5128]
[CRIT][sc_hddcare_api.c #162][@hddcare_api_start][@BR_HDDCARE_]: hddcare wait sc_storage[2] sc_hicore[2] iRetryTimes[120]
wait storage [2] and gui[2]
=== cfgpiIf.cfg=bLoaded[0]=time[1712754818]=iCount = 14 dvr_startup_rs232_init 5128]
[CRIT][cfg_flash_io.c #1607][@cfg_read_block_data_from_flash][@Th: forget to reg!]: bNeedUpdate = 0,uiCfgVersion:head[71106580] device[71106585], uiCfgDate head[1443592] device[1444101],uiLen head[6669504] device[6669504].
wait storage [2] and gui[2]
=== cfgpiIf.cfg=bLoaded[1]=time[1712754819]=iCount = 15 dvr_startup_rs232_init 5128]
wait storage [2] and gui[2]
ioctl error:0x11(File exists)
[DVR_MAIN_PROCESS][52][dvr_startup_rs232_init] finish,iRet[-1]!!,time[1712754820],cost[17]s !!
[DVR_MAIN_PROCESS][53][start_drop_caches] start!!,time[1712754820]!!
[DVR_MAIN_PROCESS][53][start_drop_caches] finish,iRet[0]!!,time[1712754820],cost[0]s !!
[DVR_MAIN_PROCESS]all func callback over!!, i[54],pFuncName[(nil)],pFuncCallback[(nil)]
[CRIT][sc_gui.c #2247][@gui_res_ini][@BR_GUI_]: ~~~~~~~ eAPP_SCID_HICORE is eSTATUS_ONLINE ~~~~~~~
:0
[CRIT][sc_gui.c #2249][@gui_res_ini][@BR_GUI_]: ~~~~~~~ abi_device_ability_init Over ~~~~~~~
:0
[CRIT][stor_config.c #102][@stor_system_ability_init][@BR_STORAGE_]:
=========STOR ABI=========
iEncChanNo[0]
iIpcChanNo[8]
iCldChanNo[4]
iTotalChanNo[78]
iSataHdNo[16]
iEsataHdNo[0]
iNetHdNo[8]
iMiniSasHdNo[0]
iSysHdNo[0]
bPlanMode[0]
bEnableQuota[1]
bCyclicRecord[1]
bHdBalanced[1]
bEnableWhCloud[0]
bSupAutoFormat[0]
bSupExcRecord[0]
cbHashBase[128]
uiMaxLoadOfSingleDisk[160]
HDISK_PART size[11240]
[CRIT][hdmanager.c #3408][@initHdiskParam][@BR_STORAGE_]: >> HDM LOAD SATA START,bSuppRaid 0!
[CRIT][hisi_bsp.c #6835][@hisi_send_hd_cmd][@BR_STORAGE_]: Without psw!
[CRIT][hisi_bsp.c #6917][@hisi_unlock_sec_hd][@BR_STORAGE_]: bLockHd is 0, the disk mn ST2000VX003-1HH164 no need to unlock ...
[CRIT][hisi_bsp.c #6918][@hisi_unlock_sec_hd][@BR_STORAGE_]: /dev/h_sda not the locked type, no need to unlock
[CRIT][stor_record_file_system.c #6250][@stor_check_partition][@BR_STORAGE_]: print get out uuid start
UUID: 0x56 0x21 0x29 0xe3 0xc5 0x43 0x4c 0x8 0xbf 0x88 0x2f 0xba 0x3 0xca 0xad 0x18 UUID: 562129e3-c543-4c08-bf88-2fba03caad18
[CRIT][stor_record_file_system.c #6252][@stor_check_partition][@BR_STORAGE_]: print get out uuid end
[BTREE][src/FileManage/src/stor_btree.c:541][stor_btree_load_hierarchy_node] input node id error.
[CRIT][stor_db_file_manager.c #1760][@stor_db_file_init][@BR_STORAGE_]: all db file done!
[CRIT][stor_db_file_manager.c #1255][@stor_db_load_not_wal_file][@BR_STORAGE_]: Recorder Detail Info Got iFileNo[0], Offset[0]!
[CRIT][stor_db_file_manager.c #1197][@stor_db_load_not_wal_file][@BR_STORAGE_]: all db file done!
[CRIT][stor_db_file_manager.c #1131][@stor_db_free_file_init][@BR_STORAGE_]: bNeedCheckLog 0,iLogDbFileNum 0
[CRIT][dbFileManage.c #6610][@check_db_mem_overrun][@BR_STORAGE_]: Current mem: 17664, Threshold: 4194304.000000, MaxMem: 5242880.
part /dev/h_sda stor_get_db_total_files alloc 1862 byte mem.
[CRIT][stor_record_file_system.c #5465][@stor_open_detail_info_file][@taskStorGetFileInfo-/dev/h_sda]: init file OK part /dev/h_sda iFileNo 0 pbNewFileAlloced[0] iPartFileCount[1862] iStartOffest 4096 iFileLen 201096
[CRIT][stor_record_file_system.c #5574][@stor_init_part_file_detail_info][@taskStorGetFileInfo-/dev/h_sda]: [/dev/h_sda] Load Detail Info START FileCount[1862]
[CRIT][hdmanager.c #3424][@initHdiskParam][@BR_STORAGE_]: >> HDM LOAD SATA DONE [239] !
[CRIT][stor_record_file_system.c #5590][@stor_init_part_file_detail_info][@taskStorGetFileInfo-/dev/h_sda]: [/dev/h_sda] Load Detail Info Stage1 Done [12.728 ms] NewFileAlloced[0]
[CRIT][stor_record_file_system.c #10618][@stor_part_file_info_verify][@taskStorGetFileInfo-/dev/h_sda]: stor_part_file_info_verify DONE iDiffCount[2]
[CRIT][stor_record_file_system.c #5602][@stor_init_part_file_detail_info][@taskStorGetFileInfo-/dev/h_sda]: [/dev/h_sda] Load Detail Info Stage2 Done [14.022 ms] bNeedHdUpdate[1]
[CRIT][stor_record_file_system.c #5624][@stor_init_part_file_detail_info][@taskStorGetFileInfo-/dev/h_sda]: [/dev/h_sda] Load Detail Info END [14.233 ms] InitSucceed[1]
[CRIT][search_play.c #42][@search_play_init_v4][@BR_STORAGE_]: --- SEARCH_PLAY_STATE_V4_T[625152] ---
[CRIT][hdmanager.c #5692][@sataTaskCtrl][@sataTaskCtrl]: hddcare_api_check_status [2]! update later !!
[CRIT][hddcare.c #67][@hddcare_set_wdda_status][@BR_HDDCARE_]: HDDCARE SERVICE NOT READY!
[CRIT][hddcare.c #67][@hddcare_set_wdda_status][@BR_HDDCARE_]: HDDCARE SERVICE READY!
[CRIT][hdmanager.c #7469][@hdmg_get_hd_basic_list][@hk_cmd_|1|200e9|_]: SingleDisk
[CRIT][hddcare.c #578][@hddcare_update_basic_info][@hddcare_notify]: IGNORED HDD[2] Status [0x4001].
[CRIT][hddcare.c #578][@hddcare_update_basic_info][@hddcare_notify]: IGNORED HDD[4] Status [0x4001].
[CRIT][hisi_bsp.c #8111][@hisi_decompress_gui_res][@BR_GUI_]: [step1] [tar -zxf /dav0/gui_res.tar.gz string -C /home/app] ----- ok ,cost time 1 S,time[113,114]!!!
wait storage [0] and gui[2]
:wait storage [0] and gui[2] and hicore[0] and ipcm[0]
wait storage [0] and gui[2]
tar: font: not found in archive
[CRIT][hisi_bsp.c #8111][@hisi_decompress_gui_res][@BR_GUI_]: [step1] [tar -zxf /dav0/gui_res.tar.gz font -C /home/app] ----- ok ,cost time 2 S,time[114,116]!!!
wait storage [0] and gui[2]
tar: imetab: not found in archive
[CRIT][hisi_bsp.c #8111][@hisi_decompress_gui_res][@BR_GUI_]: [step1] [tar -zxf /dav0/gui_res.tar.gz imetab -C /home/app] ----- ok ,cost time 1 S,time[116,117]!!!
wait storage [0] and gui[2]
[CRIT][hisi_bsp.c #8111][@hisi_decompress_gui_res][@BR_GUI_]: [step1] [tar -zxf /dav0/gui_res.tar.gz skb -C /home/app] ----- ok ,cost time 1 S,time[117,118]!!!
wait storage [0] and gui[2]
[CRIT][hddcare.c #653][@hddcare_refresh_disk_alarm][@hddcare_notify]: No Warning Base On Current Analys.
[CRIT][hdmanager.c #7469][@hdmg_get_hd_basic_list][@hk_cmd_|1|200ea|_]: SingleDisk
[CRIT][hdmanager.c #7469][@hdmg_get_hd_basic_list][@hk_cmd_|1|200e9|_]: SingleDisk
[CRIT][hddcare.c #578][@hddcare_update_basic_info][@hddcare_notify]: IGNORED HDD[2] Status [0x4001].
[CRIT][hddcare.c #578][@hddcare_update_basic_info][@hddcare_notify]: IGNORED HDD[4] Status [0x4001].
[CRIT][hdmanager.c #5892][@sataTaskCtrl][@sataTaskCtrl]: hddcare_api_check_status [0]! update !!
[CRIT][hisi_bsp.c #8111][@hisi_decompress_gui_res][@BR_GUI_]: [step1] [tar -zxf /dav0/gui_res.tar.gz 1080_res -C /home/app] ----- ok ,cost time 1 S,time[118,119]!!!
[CRIT][9000video.c #219][@DEV9000_VideoInit][@BR_GUI_]: !!!!!!!!!!! mainout = 3, auxout = 2
[CRIT][9000video.c #225][@DEV9000_VideoInit][@BR_GUI_]: ~~~~~~~~main 0x7f0aa000
************** ETCFILEPATH=/home/app/1080_res/conf/1920x1080.cfg ****************
**************LoadEtcFile L1925 ****************
************** pEtcFile=/home/app/1080_res/conf/1920x1080.cfg ****************
*****etc_ReadSection:L1854***********
***** LoadEtcFile:L1964 petc->section_nr=377***************
FONT>FT2: another error code means that the font file(/home/app/font/CN/msyh.ttf)
... could not be opened or read. or simply that it is broken ...
GDI: CreateFreeTypeFont err file: /home/app/font/CN/msyh.ttf.
FONT>FT2: another error code means that the font file(/home/app/font/CN/msyhgbk.ttf)
... could not be opened or read. or simply that it is broken ...
GDI: CreateFreeTypeFont err file: /home/app/font/CN/msyhgbk.ttf.
-------��InitSysFont���� CreateLogFont success : type[ttf] family[arial] charset[ISO8859-1] ��
-------��InitSysFont���� CreateLogFont success : type[ttf] family[arial] charset[UTF-8] ��
wait storage [0] and gui[2]
wait storage [0] and gui[2]
wait storage [0] and gui[2]
wait storage [0] and gui[2]
[CRIT][hddcare.c #653][@hddcare_refresh_disk_alarm][@hddcare_notify]: No Warning Base On Current Analys.
[CRIT][hdmanager.c #7469][@hdmg_get_hd_basic_list][@hk_cmd_|1|200ea|_]: SingleDisk
wait storage [0] and gui[2]
wait storage [0] and gui[2]
:wait storage [0] and gui[2] and hicore[0] and ipcm[0]
wait storage [0] and gui[2]
wait storage [0] and gui[2]
[CRIT][hkdpl_core.c #658][@hkdpl_cb_read][@evt2-hkdpl_/home/app/exec/master-0]: pCore(/home/app/exec/master)->pEvRead error!SysErrNo(11)
[CRIT][hkdpl_core.c #660][@hkdpl_cb_read][@evt2-hkdpl_/home/app/exec/master-0]: (/home/app/exec/master) cb_read BufR_W(0)R(0),BufR_Len(0x131072).
[CRIT][hkdpl_core.c #582][@hkdpl_err_happen][@evt2-hkdpl_/home/app/exec/master-0]: Detail Unix: Local[/var/master]-Peer[/var/cl.sc_hicore]
[CRIT][broker_master.c #561][@fn_master_status][@evt2-hkdpl_/home/app/exec/master-0]: Slave unix hdl [0x88a5f008] diconnect!!!
[CRIT][sbus_util.c #603][@uni_hdl_info][@evt2-hkdpl_/home/app/exec/master-0]: fn_master_status hdl: [0x88a5f008] fd:[24] type[1] name[/home/app/exec/master]
[CRIT][sbus_util.c #608][@uni_hdl_info][@evt2-hkdpl_/home/app/exec/master-0]: Unix: [/var/master]
[CRIT][sbus_util.c #644][@sbus_proc_exit][@evt2-hkdpl_/home/app/exec/master-0]:
~~~~~~~~~~~~pid (1990) will exit!
~~~~~~~~~~~~FN:[fn_master_status]
~~~~~~~~~~~~iRet [-88][Session Handle Err!!]
reap_cld_res: No such file or directory
[CRIT][sbus_fork.c #35][@reap_cld_res][@br_status_check1990 ]: wait pid 2002 status 9
[CRIT][broker_master.c #437][@fn_slave_err][@br_status_check1990 ]: start to get lokc!
[CRIT][broker_master.c #447][@fn_slave_err][@br_status_check1990 ]: find crushed br_slave(sc_hicore) (2002)~~~~~~~~~
[CRIT][broker_master.c #452][@fn_slave_err][@br_status_check1990 ]: end release lokc!
[CRIT][sys_guide.c #1662][@fsync_log_file][@br_status_check1990 ]: bsp shared log file with app, no need fsync again!
[CRIT][hkdpl_core.c #658][@hkdpl_cb_read][@evt2-hkdpl_sc_hddcare-0]: pCore(sc_hddcare)->pEvRead error!SysErrNo(104)
[CRIT][hkdpl_core.c #660][@hkdpl_cb_read][@evt2-hkdpl_sc_hddcare-0]: (sc_hddcare) cb_read BufR_W(0)R(0),BufR_Len(0x131072).
[CRIT][hkdpl_core.c #658][@hkdpl_cb_read][@evt2-hkdpl_sc_T1-0]: pCore(sc_T1)->pEvRead error!SysErrNo(104)
[CRIT][hkdpl_core.c #660][@hkdpl_cb_read][@evt2-hkdpl_sc_T1-0]: (sc_T1) cb_read BufR_W(0)R(0),BufR_Len(0x131072).
[CRIT][hkdpl_core.c #582][@hkdpl_err_happen][@evt2-hkdpl_sc_hddcare-0]: Detail Unix: Local[/var/cl.sc_hddcare]-Peer[/var/master]
[CRIT][broker_slave.c #2659][@fn_slave_status][@evt2-hkdpl_sc_hddcare-0]: Master unix hdl [0x89194008] diconnect!!!
[CRIT][sbus_util.c #603][@uni_hdl_info][@evt2-hkdpl_sc_hddcare-0]: fn_slave_status hdl: [0x89194008] fd:[22] type[1] name[sc_hddcare]
[CRIT][hkdpl_core.c #582][@hkdpl_err_happen][@evt2-hkdpl_sc_T1-0]: Detail Unix: Local[/var/cl.sc_T1]-Peer[/var/master]
[CRIT][sbus_util.c #608][@uni_hdl_info][@evt2-hkdpl_sc_hddcare-0]: Unix: [sc_hddcare]
[CRIT][sbus_util.c #644][@sbus_proc_exit][@evt2-hkdpl_sc_hddcare-0]:
~~~~~~~~~~~~pid (2003) will exit!
~~~~~~~~~~~~FN:[fn_slave_status]
~~~~~~~~~~~~iRet [-88][Session Handle Err!!]
[CRIT][broker_slave.c #2659][@fn_slave_status][@evt2-hkdpl_sc_T1-0]: Master unix hdl [0x891a3008] diconnect!!!
[CRIT][sbus_util.c #603][@uni_hdl_info][@evt2-hkdpl_sc_T1-0]: fn_slave_status hdl: [0x891a3008] fd:[22] type[1] name[sc_T1]
[CRIT][sbus_util.c #608][@uni_hdl_info][@evt2-hkdpl_sc_T1-0]: Unix: [sc_T1]
[CRIT][sbus_util.c #644][@sbus_proc_exit][@evt2-hkdpl_sc_T1-0]:
~~~~~~~~~~~~pid (2004) will exit!
~~~~~~~~~~~~FN:[fn_slave_status]
~~~~~~~~~~~~iRet [-88][Session Handle Err!!]
file[src/gpl_client_proc.c] line[38]connect error: 111
connect to gplclient.socket error
file[src/gpl_client_proc.c] line[38]connect error: 111
connect to gplclient.socket error
file[src/gpl_client_proc.c] line[38]connect error: 111
connect to gplclient.socket error
file[src/gpl_client_proc.c] line[38]connect error: 111
connect to gplclient.socket error
file[src/gpl_client_proc.c] line[38]connect error: 111
connect to gplclient.socket error
file[src/gpl_client_proc.c] line[38]connect error: 111
connect to gplclient.socket error
file[src/gpl_client_proc.c] line[38]connect error: 111
connect to gplclient.socket error
file[src/gpl_client_proc.c] line[38]connect error: 111
connect to gplclient.socket error
file[src/gpl_client_proc.c] line[38]connect error: 111
connect to gplclient.socket error
file[src/gpl_client_proc.c] line[38]connect error: 111
connect to gplclient.socket error
connect to gplclient.socket error 10 times
in gpl_dhcp_get_inter_ipv4_addr, call send_msg_to_client failed.
net_zerocfg_run:start zeroconfig
[ 156.263427] [HKBSP][hik_wdt hik_wdt.1]hik-wdt:hikwdt_isr. Call hikwdt notifier chain!
[ 156.271377] CPU0 Inc CPU1 Inc CPU2 Inc CPU3 Inc
[ 156.282120] 32: 1 1 0 0 0 0 0 0 GIC HIK_WDT_INT
[ 156.293577] 35: 12109 2894 0 0 0 0 0 0 GIC timer4
[ 156.304590] 36: 0 0 0 0 13336 2898 0 0 GIC timer6
[ 156.315604] 37: 0 0 0 0 0 0 0 0 GIC RTC Alarm
[ 156.326885] 38: 4918 455 0 0 0 0 0 0 GIC uart-pl011
[ 156.338253] 43: 34 0 0 0 0 0 0 0 GIC Hisilicon Dmac
[ 156.349922] 49: 0 0 0 0 0 0 0 0 GIC hik_ir
[ 156.360940] 50: 0 0 0 0 0 0 0 0 GIC hi_cipher_irq
[ 156.372557] 52: 1 0 0 0 0 0 0 0 GIC ohci_hcd:usb2
[ 156.384184] 53: 0 0 0 0 0 0 0 0 GIC ehci_hcd:usb1
[ 156.395822] 55: 0 0 0 0 0 0 12 2 GIC stmmaceth
[ 156.407044] 56: 0 0 0 0 0 0 0 0 GIC stmmaceth
[ 156.418325] 57: 0 0 0 0 0 0 0 0 GIC stmmaceth
[ 156.429594] 58: 0 0 0 0 0 0 0 0 GIC stmmaceth
[ 156.440867] 59: 292 0 0 0 0 0 0 0 GIC ahci
[ 156.451665] 60: 16 0 0 0 0 0 0 0 GIC xhci-hcd:usb3
[ 156.463290] 78: 0 0 0 0 0 0 0 0 GIC IVE
[ 156.474047] 79: 6759 2895 0 0 0 0 0 0 GIC AIO Interrupt
[ 156.485668] 80: 8 0 0 0 0 0 0 0 GIC hi_tde_irq
[ 156.497029] 94: 0 0 0 0 0 0 0 0 GIC hi_iommu
[ 156.508222] 105: 6 0 0 0 0 0 0 0 GIC timer
[ 156.519156] 107: 0 0 13127 2919 0 0 0 0 GIC timer5
[ 156.530169] 108: 0 0 0 0 0 0 14093 2920 GIC timer7
[ 156.541187] 112: 10960 3474 0 0 0 0 0 0 GIC VOU Interrupt
[ 156.552820] 125: 1 0 0 0 0 0 0 0 GIC mali.0
[ 156.563789] 126: 1 0 0 0 0 0 0 0 GIC mali.0
[ 156.574803] 127: 1 0 0 0 0 0 0 0 GIC mali.0
[ 156.585818] total: 75675
[ 156.588450] [HKBSP][hik_wdt hik_wdt.1]hik-wdt:hikwdt_isr. I'm so Sorry (>_<)...
[ 156.595806] [HKBSP][hik_wdt hik_wdt.1]hik-wdt:hikwdt_isr. last_feedwdt:4294950028(jiffies64:4294952922,timeout:25)