Thanks for this comment, @looney2ns . I was thinking of upgrading my PTZ1A225U-IRA-N. With the above, no way.Note: This firmware has an issue with IVS stopping to work after 5-6 days. It requires a reboot of the cam, to get them working again. Using this in two different cams, both have the same IVS issue.
Used on
SD59225U-HNI
and the
SD6CE245U-HNI
Anyone else seeing this?
@looney2ns You are obviously one of the most experienced people here at updating firmware, so knowing that you've done everything in the best manner possible, and that Dahua hasn't updated the firmware download on their site since the Aug 2018 version (SD59225U-HNI), I'm wondering if that implies this software has known problems and if there is any hope for a new update. What are your thoughts?Note: This firmware has an issue with IVS stopping to work after 5-6 days. It requires a reboot of the cam, to get them working again. Using this in two different cams, both have the same IVS issue.
If you use auto-maintain daily does that stop the issue?Note: This firmware has an issue with IVS stopping to work after 5-6 days. It requires a reboot of the cam, to get them working again. Using this in two different cams, both have the same IVS issue.
Used on
SD59225U-HNI
and the
SD6CE245U-HNI
Anyone else seeing this?
I'm currently testing this firmware on a SD6CE245U-HNI. Stay tuned for more.@EMPIRETECANDY Any word on the SD6CE245U-HNI firmware?
Not completely, because of the timing, it will still have a about 40hrs that ivs stops, since the reboot is only every 7 days.If you use auto-maintain daily does that stop the issue?