Dahua/Empiretech 5442 General_IPC-HX5XXX-Volt_MultiLang_NP_Stream3_V2.800.15OG004.0.R.201203

Dahua/Empiretech 5442 General_IPC-HX5XXX-Volt_MultiLang_NP_Stream3_V2.800.15OG004.0.R.201203 12-03-20

The Smart IR firmware has been released. The update is mainly because of the new lot has a small hardware change, so this firmware can work for both the latest new cameras and old batches.

Warning
Remember, only update firmware if you feel it may fix an ongoing issue with your cam.
There is always the risk of bricking the camera. Update firmware at your own risk.

Best Practices
1-Reboot cam
2-Reset to factory defaults
3-Update firmware
4-Reset to factory defaults once again
5-Set up from scratch, do not import saved settings.
6-After upgrade and resets, IP address will be 192.168.1.108

For these models.
IPC-T5442T-ZE
IPC-T5442TM-AS
IPC-T5241TM-AS
IPC-B5442E-ZE
IPC-B5442E-Z4E
IPC-T5241H-AS-PV
IPC-D5442E-ZE
IPC-D5442E-Z4E
IPC-HFW5241E-Z12E
IPC-HFW5241E-ZE
IPC-HFW5241E-Z5E
IPC-HDPW5442GP-Z
IPC-HFW5241T-AS-PV
IPC-HFW5541TP-AS-PV
IPC-HDW5541HP-AS-PV
Author
looney2ns
Downloads
24
Views
195
First release
Last update
Rating
0.00 star(s) 0 ratings
Top