Cat6 end on Poe Camera. Line got cut. Pin out please.

[stevef22]

The line got cut so I want to make a direct connection with plastic piece. Send me a diagram of Pin out

I’m going to make cat 6 connection

 

[TonyR]

Not saying it WILL help but having make/model number of cam would not hurt.

BTW, looks like you have enough colored wires intact to find or skin back insulation to create bare spots so you can use an Ohmmeter/continuity checker to locate which color goes to which pin of the existing female RJ-45 (as pictured below left of male) ...is that not the case?

 

[stevef22]

Camera model is IPC-HDW5231R-ZE bought from Andy. The colors of wire do not match pin out on standard Cat6e connector.

 

[TonyR]

Camera model is IPC-HDW5231R-ZE bought from Andy.

Thanks for that.

The colors of wire do not match pin out on standard Cat6e connector.

I would not expect it to and didn't suggest that it would. But that does not matter if YOU can visibly and with a continuity checker verify which color goes to which pin...is that a possibility?

I would think so since you can say that they don't match!

 

[stevef22]

Ohh, I see what you are saying. Yes, thanks for the tip! Will post progress.

Much appreciated

 

[Sybertiger]

The line got cut so I want to make a direct connection with plastic piece. Send me a diagram of Pin out

I’m going to make cat 6 connection

That's weird...you have internet but no access to Google?

Dahua IP Camera color code/pinout for the Ethernet

Anyone out there have the color code/pinout for the Ethernet port on an IPC-HFW2100 IP camera? The POE Ethernet port for my IP camera is damaged and missing a pin. I want to replace the port with a standard RJ45 keystone jack. If I knew the color code and pinout for the camera I could do this. Ca...

www.cctvforum.com

Definitely get a continuity tester.

 

[eeeeesh]

I damaged the pigtail on the same model of camera - look at this post, it has what you need along with a diagram/pic

Damaged Pig Tail Jack - Lemon-aid out of Lemons

Well, I screwed up the pigtail jack on my 5231R-ZE, and it was completely my fault. I was trying out different locations in my backyard, using a premade 50' length of CAT 6, so I was not able to use the weathertight connector that comes with the camera. I am in S Cal, and was not expecting...

www.ipcamtalk.com

 

[TonyR]

^^^ Kudos.

Not saying it WILL help but having make/model number of cam would not hurt.

See what I mean? @eeeeesh came through, man.