I want to use a RPi as a tool to help me install a Dahua IPC-HDW5231RP-ZE outside. The Dahua camera is already working with my Hikvision NVR and PC inside. I want an alternative to using a smart phone.
I've been using a RPi and monitor for installing Hikvision cameras. It's simple to take outside the RPi, monitor, POE switch, camera, then one command in the terminal and the camera's image is displayed.
The Hikvision stream is typically rtsp://admin:<password>@<IP address of camera >/h264/ch1/sub/av_stream. This does not work though for the Dahua camera.
(Incidentally using VLC the Hikvision NVR stream is rtsp://admin:<password@<NVR's IP>:554/Streaming/Channels/101 or 102 but would be less easy for me to take outside my desktop PC to view the Dahua camera)
None of the Dahua camera rtsp input lines I've seen have worked for my RPI's omxplayer.
What Dahua rtsp stream description might work with omxplayer?
I've been using a RPi and monitor for installing Hikvision cameras. It's simple to take outside the RPi, monitor, POE switch, camera, then one command in the terminal and the camera's image is displayed.
The Hikvision stream is typically rtsp://admin:<password>@<IP address of camera >/h264/ch1/sub/av_stream. This does not work though for the Dahua camera.
(Incidentally using VLC the Hikvision NVR stream is rtsp://admin:<password@<NVR's IP>:554/Streaming/Channels/101 or 102 but would be less easy for me to take outside my desktop PC to view the Dahua camera)
None of the Dahua camera rtsp input lines I've seen have worked for my RPI's omxplayer.
What Dahua rtsp stream description might work with omxplayer?